Help shape GoConqr. What should we add next?

Flashcards

3.3 Scientific Detection Flash Cards 2

Mrs G Edwards Chemistry GCSE English 55 cards

Cards in this deck (55)

  1. 1What is the role of an analytical scientist?Collect samples for testing
  2. 2What is a standard operating procedure?Special procedures followed by the analytical scientist
  3. 3How are samples collected respective of the sample?Choosing the correct method and following standard operating procedures
  4. 4How would you take a sample of water from a stream?1. Collect water from the stream moving
    2. Collect sample 1-2cm from below the surface
    3. Fill the bottle to the top and add a lid
    4. Write an identification number on the bottle with permanent ink
    5. Record the details of the sample
  5. 5How would you take a sample of water from a tap?1. Remove all attachments from the tap
    2.. Identify the bottle with a number
    3. If used for metal analysis, take a sample straight away
    4. Take another sample 2 minutes after running the tap
    5. Record the details of the sample
  6. 6What is qualitative analysis?Identifies whether a particular substance is present
  7. 7What is quantitative analysis?Gives the concentration of a substance that is present
  8. 8What is semi-quantitative analysis?Gives a rough idea of how much of a substance is present. It is not as exact as quantitative analysis
  9. 9Give 5 examples of qualitative analysisFlame tests
    Test with sodium hydroxide (NaOH)
    Test for sulfates (SO42-)
    Test for carbonates (CO32-)
    Test for chlorides (Cl-)
  10. 10What is a cation?Metal (positive) ion
  11. 11What is an anion?Negative (non-metal) ion
  12. 12What is the test for carbon dioxide?Bubble the gas through limewater.
    Observation: Limewater turns milky
  13. 13How do you carry out a flame test?1. Clean a wire loop in dilute hydrochloric acid
    2. Dip the metal loop into the solution or solid to be tested
    3. Hold the loop in the edge of a Bunsen burner flame.
  14. 14What colour flame would you see for sodium ion (Na+)?Yellow / orange
  15. 15What colour flame would you see for potassium ion (K+)?Lilac
  16. 16What colour flame would you see for barium ion (Ba2+)?Apple green
  17. 17What colour flame would you see for calcium ion (Ca2+)?Brick red
  18. 18What colour flame would you see for copper ion (Cu2+)?Green / blue
  19. 19What colour flame would you see for lithium ion (Li+)?Red
  20. 20What would you observe when sodium hydroxide (NaOH) is added to a solution containing Ca2+ ions?White precipitate which does NOT re-dissolve when sodium hydroxide solution is added to excess
  21. 21What would you observe when sodium hydroxide (NaOH) is added to a solution containing Pb2+ ions?White precipitate which re-dissolves when sodium hydroxide solution is added to excess
  22. 22What would you observe when sodium hydroxide (NaOH) is added to a solution containing Fe2+ ions?Green precipitate (slowly turns brown on standing)
  23. 23What would you observe when sodium hydroxide (NaOH) is added to a solution containing Fe3+ ions?Rust brown precipitate
  24. 24What would you observe when sodium hydroxide (NaOH) is added to a solution containing Cu2+ ions?Blue precipitate
  25. 25What is a precipitate?An insoluble solid that is formed when two solutions react together
  26. 26What is the test for a carbonate (CO32-)?Add dilute hydrochloric acid to the solid or a solution
    Observation: You will see bubbling. A colourless gas (carbon dioxide) is given off
    Test: Bubble the gas through limewater which turns milky.
  27. 27What is the test for a sulfate (SO32-)?Add a few drops of dilute hydrochloric acid followed by a few drops of dilute barium chloride solution.
    Observation: A white precipitate of barium sulfate
  28. 28What is the test for chlorides?Add a few drops of dilute nitric acid followed by a few drops of dilute silver nitrate solution.
    Observation: A white precipitate of silver chloride is formed
  29. 29What is chromatography?A method which allows us to separate the components in a mixture and identify what is present
  30. 30What is paper chromatography used for?Separate and identify colourings in food dyes and lipstick
  31. 31What is thin layer chromatography used for?Analysis of pollutants in the environment
    Separation of colourings in plants (e.g. grass)
  32. 32What is gas liquid chromatography used for?Analyse air pollutants
  33. 33What is high performance liquid chromatography used for?Monitoring athletes for drug use by examining drugs in hair or blood samples
  34. 34What is the stationary phase?The phase that doesn't move (e.g the chromatography paper)
  35. 35What is the mobile phase?The phase that moves (e.g the water)
  36. 36Which pigments will travel the furthest on the stationary phase?The more soluble pigment
  37. 37Why is pencil used to draw the line in paper chromatography?It is insoluble
  38. 38Does the water need to be above or below the pencil line in paper chromatography?Below
  39. 39How do you work out Rf value?Rf = Distance moved by the sample / Distance moved by the solvent
  40. 40What will happen to the Rf value if you change the conditions, such a solvent?The Rf value will change
  41. 41How is thin layer chromatography different to paper chromatography?It has a solid stuck to a glass plate.
  42. 42In gas liquid chromatography, what is the stationary and mobile phase?Stationary: Liquid Mobile: Gas
  43. 43What is retention time (tR)?The time taken for a substance to travel through a column
  44. 44What does the retention time depend on?Temperature
    The stationary phase
    The mobile phase
    How fast the mobile phase flows
  45. 45What does colorimetry do?It measures the concentrations of coloured ions or substances in solutions
  46. 46Give 2 examples for the uses of colorimetry?Measuring haemoglobin levels in blood
    Measuring the nitrate concentration in river water
  47. 47What do acid-base titrations do?Measures the volume of an acid need to neutralise an alkali to then work out its concentration.
  48. 48Give 2 examples for the uses of acid-base titrations?Finding the carbonate concentration in river water
    Finding the concentration ethanoic acid in vinegar (food standards)
    Quality control laboratories
  49. 49What are the steps in steps in colorimetric analysis?1. Measure the absorbance for five solutions of different concentrations.
    2. Plot a graph for each solution to form a calibration curve.
    3. Measure the absorbance of the unknown solution and use the calibration curve to find its concentration.
  50. 50What is a pipette used for in an acid-base titration?To accurately measure a known volume of alkali
  51. 51What is a burette used for in an acid-base titration?Accurately transfers small volumes of acid until the indicator changes colour in the conical flask.
  52. 52What is the titre in an acid-base titration?The final burette reading minus the initial burette reading. It is the volume of acid used each time.
  53. 53Do we include our trial (rough)reading in our mean?No, because it is difficult to get it right the first time you do a titration.
  54. 54Name 3 sources of error in a titration1. Not reading the meniscus on the burette from the bottom.
    2. Adding the solution from the burette too quickly near the endpoint.
    3. Not swirling the conical flask when you add the solution from the burette.
  55. 55—

Information

Description
GCSE Chemistry (Unit 3.3 Scientific Detection) Flashcards on 3.3 Scientific Detection Flash Cards 2, created by Mrs G Edwards on 04/04/2025.
Created by
Mrs G Edwards
Views
99
Rating

More on Tests for ions

Feedback

What is it about?

What should we add next?