GoConqr has a new look! Let us know what you think.

Notes

Chapter 11: Biodiversity

Emily Rowland-Rawson Biology A-level English 8 pages

Content of the notes (8)

Page 1

11.1 Biodiversity

Types of biodiversity

Biodiversity is essential in maintaining a balanced ecosystem for all organisms. All species are interconnected -they depend on one another. For example, trees provide homes for animals. Animals eat plants, which in turn need fertile soil to grow. fungi and other microorganisms help decompose dead plants and animals, returning nutrients to the soil. In regions of reduced biodiversity, these connections may not all be present, which eventually harms all species in the ecosystem. We rely on balanced ecosystems as they provide us with the food, oxygen and other materials we need to survive. Unfortunately, many human activities, such as fanning and clearing land for housing, can lead to a reduction in biodiversity. The two ecosystems below, a coral reef and rainforest, are among some of the most biodiverse on the planet.

Tropical, moist regions (that are warm all year round) have the most biodiversity. The UK's temperate climate (warm summers and cold winters) has less biodiversity. Very cold areas such as the Arctic, or very dry areas such as deserts, have the least biodiversity. Generally, the closer a region is to the Equator (the line of latitude of the Earth, halfway between the North Pole and South Pole), the greater the biodiversity. For example, over 40 000 plant species live in the Amazon rainforest, whereas less than 3000 live in Northern Canada.

Types of biodiversity Biodiversity is essential in maintaining a balanced ecosystem for all organisms. All species are…

Habitat biodiversity

Habitat biodiversity refers to the number of different habitats found within an area . Each habitat can support a number of different species. Therefore in general. the greater the habitat biodiversity, the greater the species biodiversity will be within that area. The UK is home to large n umber of habitat types, including meadow, woodland, streams, and sand dunes. It has a large habitat biodiversity. By contrast Antarctica, covered almost entirely by an ice sheet, has a very low habitat biodiversity and very few species live in this region. On a smaller scale, countryside that is habitat rich, perhaps with a river, woodland, hedgerows and wild grassland, will be more species rich than farmed countryside with large ploughed fields making up a single uniform habitat.

Species biodiversity

Species biodiversity has two different components:

species richness- the number of different species living in a particular area

species evenness- a comparison of the numbers of individuals of each species living in a community. (The community is all the populations of living organisms in a particular habitat.)

Therefore an area can differ in its species biodiversity even if it has the same number of species. for example, a cornfield and a grass meadow may both contain 20 species. However, in the cornfield, corn will make up 95% of the community with the remaining 5% made up of other organisms including weed plants, insects, mice, and birds. In the grass meadow the species will be more balanced in their populations.

Genetic biodiversity

Genetic biodiversity refers to the variety of genes that make up a species. Humans have about 25 000 genes, but some species of flowering plants have as many as 400 000 genes. Many of these genes are the same for all individuals within a species. However, for many genes, different versions (alleles) exist. This leads to genetic biodiversity within a species.

Genetic biodiversity within a. species can lead to quite different characteristics being exhibited. For example, some genes are the same for all breeds of dog- these genes define the organism as a dog. Some of the genes have many alleles- they code for the wide variation in characteristics seen between different breeds of dog, for example coat colour and length. Greater genetic biodiversity within a species allows for better adaptation to a changing environment and is more likely to result in individuals who are resistant to disease.

Page 2

11.2 Sampling

Random sampling

Random sampling means selecting individuals by chance. In a random sample, each individual in the population has an equal likelihood of selection, rather like picking names out of a hat. This means that there is no bias involved. Sampling can be used to estimate the number of organisms in an area without having to count them all. The number of individuals of a species present in an area is known as the abundance of the organism. Sampling can also be used to measure a particular characTeristic of an organism.

Non-random sampling

There are three main methods of non-random sampling.

Opportunistic: uses organisms that are conveniently available. It is the weakest form of sampling as it may not be representative of the whole population.

Stratified: some populations can be divided into a number of strata (sub-groups) based on a particular characteristic. For example, a population could be separated into males and females. A random sample is then taken from each of these strata proportional to its size.

Systematic: in systematic sampling different areas with in an overall habitat are identified, which are then sampled separately. For example, systematic sampling may be used to study how plant species change as you move inland from the sea. Systematic sampling is often carried out using a line or a belt transect.

Reliability of sampling

Sampling bias: the selection process may be biased. This may be by accident, or may occur deliberately. For example, you may choose to sample a particular area that has more flowers because it looks interesting. The effects of sampling bias can be reduced using random sampling, where human involvement in choosing the samples is removed.

Chance: the organisms selected may, by chance, not be representative of the whole population. For example, a sample of five worms collected in a trap may be the five longest in the habitat. Chance can never be completely removed from the process, but its effect can be minimised by using a large sample size. The greater the number of individuals studied, the lower the probability that chance will in£1uence the result. Therefore the larger the sample size, the more reliable the result.

Page 3

11.3 Sampling techniques

Sampling animals

A pooter is used to catch small insects. By sucking on a mouthpiece, insects are drawn into the holding chamber via the inlet tube. A filter before the mouthpiece prevents them from being sucked into the mouth.

Sweep nets are used to catch insects in areas of long grass.

Pitfall traps arc used to catch small crawling invertebrates such as beetles, spiders and slugs. A hole is dug in the ground, which insects fall into. It must be deep enough that they cannot crawl out and covered with a roof-structure propped above so that the trap docs not fill with rainwater. The traps are normally left overnight, so that nocturnal species arc also sampled.

Tree bearing is used to take samples of the invertebrates living in a tree or bush. A large white cloth is stretched out under the tree. The tree is shaken or beaten to dislodge the invertebrates. The animals will fa ll onto the sheet where they can be collected and studied.

Kick sampling is used to study the organisms living in a river. The river bank and bed is 'kicked' for a period of time to disturb the substrate. A net is held just downstream for a set period of time in order to capture any organisms released into the flowing water.

Sampling plants

Point quadrat - this consists of a frame containing a horizontal bar. At set intervals along the bar, long pins can be pushed through the bar to reach the ground. Each species of plant the pin touches is recorded.

Frame quadrat- this consists of a square frame divided into a grid of equal sections. The type and number of species within each section of the quadrat is recorded.

Frame quadrats

A frame quadrat is used to sample the population of plants living in a habitat. There are three main ways of doing this:

Density: if individual large plants can be seen clearly, count the number of them in a 1m by 1m square quadrat. This will give you the density per square metre. This is an absolute measure, not an estimate as the following two methods.

Frequency: this is used where individual members of a species

are hard to count, like grass or moss. Using the small grids within a quadrat, count the number of squares a particular species is present in. For example, if clover is present in 65 out of I 00 squares, the frequency of its occurrence is 65%. (Each square represents 1%.) Another commonly used quadrat contains 25 squares- in this case, each square represents 4% ol the study area. Therefore if, during a sampling of grassland, eight quadrat squares contained buttercups, the frequency of occurrence would be 32%.

Percentage cover: this is used for speed as lots of data can be collected quickly. It is useful when a particular species is abundant or difficult to count. It is an estimate by eye of the area within a quadrat that a particular plant species covers.

Page 4

11.4 Calculating biodiversity

Ecologists, such as those working for the Environment Agency. often perform calculations using specific formulae to determine the biodiversity of an area. One such calculation is a measure of the species diversity. The diversity of the organisms present in an area

is normally proportional to the stability of the ecosystem, so the greater the species diversity the greater the stability. The most stable communities have large numbers of fairly evenly distributed species, in good-sized populations.

Pollution ohen reduces biodiversity. As a result of harsh conditions, a few species tend to dominate. recorective steps are taken to improve environmental conditions, biodiversity levels usually increase. Monitoring biodiversity is therefore a useful tool in successful conservation and environmental management.

Page 5

11.5 Factors affecting genetic biodiversity

Natural selection and genetic drift

Natural selection causes species to evolve with the majority of the population containing alleles that code for advantageous characteristics. Over time, alleles coding for less advantageous characteristics will be lost from a population, or only remain in a few individuals. While the dominating alleles may help the general population of species survive, it will decrease biodiversity by limiting intraspecific genetic variation.

Genetic drift, due to the random nature of alleles being passed on from parents to their offspring, the frequency of occurrence of an allele will vary. In some cases, particular alleles can disappear from a population altogether, especially in populations with a low genetic biodiversity.

Captive breeding programmes and rare breeds

Captive breeding programmes are generally considered beneficial for population growth, but not for genetic diversity.

Rare breeds, where selective breeding has been used historically to produce a breed of domestic animal or plant with characteristics which then become less popular or unfashionable, so the numbers of the breed fall catastrophically. When only a small number of individuals of a breed remain and are available for breeding, and all of these animals will have been selected for the specific breed traits, the genetic diversity of the remaining population will be low. This can cause serious problems when trying to restore numbers yet maintain breed characteristics.

Genetic bottlenecks and the founder effect

The founder effect, where a small number of individuals create a new colony, geographically isolated from the original. The gene pool for this new population is small.

A significant proportion of the population has complete achromatopsia due to total absence of working cones in their eye retinas, leaving them with only rods, a recessive genetic disorder that causes total color blindness in sufferers. This condition is known on the island as maskun, meaning literally "not see" in Pingelapese.

Wider reading: The founder effect on Pingelap island

Pingelap is an atoll in the Pacific Ocean consisting of three islands of which one, Pingelap island, is inhabited. A significant proportion of the population has a reessive genetic disorder called complete achromatopsia that causes total color blindness due to total absence of working cones in their eye retinas, leaving them with only rods. This is known as 'maskun' in Pingelapese meaning "not see".

Complete achromatopsia is normally a very rare condition, and its prevalence on the island has been traced back to a population bottleneck in 1775 after a catastrophic typhoon left only about 20 survivors. One of these, Doahkaesa Mwanenihsed, is believed to have been a carrier for the underlying genetic condition, but the achromatopsia disorder did not appear until the fourth generation after the typhoon, by which time 2.7% of the Pingelapese were affected. Since achromatopsia is an autosomal recessive disorder, inbreeding between the descendants of Doahkaesa would result in an increased recessive allele frequency. Due to the small gene pool and rapid population growth, the founder effect beginning after the typhoon has resulted with the disorder being prevalent in almost 10% of the population, with a further 30% being unaffected carriers. (By comparison, in the United States only 0.003% are affected).

Page 6

11.6 Factors affecting biodiversity

Human influence on biodiversity

To create enough space for housing, industry. and farming to support the increasing population, humans arc severely disrupting the ecology of many areas. The main problems arc occurring as a result of:

deforestation: the permanent removal of large areas of forest

to provide wood for building and fuel (known as logging). and tO create space for roads, building and agriculture.

agriculture: an increasing amount of land has to be farmed in order to feed the growing population. This has resulted in large amounts of land being cleared and in many cases planted with a single crop (monoculture).

climate change: there is much evidence that the release of carbon dioxide and other pollutants into the atmosphere from the burning of fossil fuels is increasing global temperatures.

Agricultural influence

In order w be economically viable, once the farmers have selected their desired species, a number of techniques are used to produce as many of the desired species as possible, maximising food production. Unfortunately many of these techniques lead to a reduction in biodiversity.

Deforestation: to increase the area of land available for growing crops or rearing animals.

Removal of hedgerows: as a result of mechanisation, farmers remove hedgerows to enable them to use large machinery to help them plant, fertilise, and harvest crops. It also frees up extra land for crop growing. This reduces the number of plant species present in an area and destroys the habitat of animals such as blackbirds, hedgehogs, mice and many invertebrates.

Use of chemicals such as pesticides and herbicides. Pesticides are used to kill pests that would eat the crops or live on the animals. This reduces species diversity directly as it destroys the pest species (normally insects), and indirectly by destroying the food source of other organisms.

Monoculture: many farms specialise in the production of only one crop, with many acres of land being used for the growth

of one species. This has an enormous local effect in lowering biodiversity as only one species of plant is present. As relatively few animal species will be supported by only one type of plant, this results in low overall biodiversity levels. The growth of vast oil palm plantations is one of the leading causes of rainforest deforestation, leading to a loss of habitat for critically endangered species like the rhino.

The effect of global warming

The melting of the polar ice caps could lead to the extinction of the few plant and animal species living in these regions. Some species of animals present in the Arctic are migrating further and further north to find favourable conditions as their habitat shrinks. Increasing global temperatures would allow temperate plant and animal species to live further north than currently.

Rising sea levels from melting ice caps and the thermal expansion of oceans could flood low-lying land, reducing the available terrestrial habitats. Saltwater would flow further up rivers, reducing the habitats of freshwater plants and animals living in the river and surrounding areas.

Higher temperatures and less rainfall would result in some plant species failing to survive, leading to drought-resistant species becoming more dominant. The loss of non-drought-resistant species of plants would lead to the loss of some animal species dependent on them as a food source. These would be replaced by other species that feed on the xerophytes.

Insect life cycles and populations will change as they adapt to climate change. Insects are key pollinators of many plants. so

if the range of an insect changes, it could affect the lives of the plants it leaves behind, causing extinction. And as insects carry many plant and animal pathogens, if tropical insects spread. this in turn could lead to the spread of tropical diseases towards the poles.

Page 7

11.7 Reasons for maintaining biodiversity

Economic

Soil erosion and desertification may occur as a result of deforestation. These reduce a country's ability to grow crops and feed its people, which can lead to resource, and economic-, dependence on other nations.

It is important to conserve all organisms that we use to make things. Non-sustainable removal or resources, such as hardwood timber, will eventually lead to the collapse of industry in an area. Once all or enough of the raw material has been lost, it does

not become economically viable to continue the industry. Note that even when 'sustainable' methods are used- for example replanting forest areas, the new areas will not be as biodiverse as the established habitats they replace.

Large-scale habitat and biodiversity losses mean thar species with potential economic importance may become extinct before they

arc even discovered. For example, undiscovered species in tropical rainforests may be chemically or medically useful. A number of marine usc a chemical-based defence mechanism. These arc rich potential sources or new and economically important medicines.

Aesthetic

The presence of different plants and animals in our environment enriches our lives. For example, you might like to relax on a beach, walk in your local woodland or park or visit a rainforest.

The natural world provides inspiration for people such as musicians and writers, who in turn provide pleasure for many others through music and books.

Studies have shown that patients recover more rapidly from stress and injury when they are supported by plants and a relatively natural environment.

Ecological reasons

All organisms are interdependent on others for their survival. The removal of one species may have a significant effect on others, for example a food source or a place to live may be lost. For example, decomposers break down dead plant and animal remains, releasing nutrients into the soil, which plants later use for healthy growth. Plants rely on bees for pollination -this is important for both wild plam species and commercially produced crops. Fruit farmers use bees to pollinate their crops; a decrease in the wild bee population would decrease crop yields.

Some species play a key role in maintaining the structure of an ecological community. These are known as keystone species. They have a disproportionately large effect on their environment relative to their abundance (in terms of their biomass or productivity). They affect many other organisms in an ecosystem and help to determine the species richness and evenness in the community. When a keystone species is removed the habitat is drastically changed. All other species are affected and some may disappear all together. It is therefore essential to protect keystone species to maintain biodiversity.

Page 8

11.8 Methods for maintaining biodiversity

Conservation is the name given to the preservation and careful management of the environment and of natural resources. By conserving the natural habitat in an area, organisms' chances

of survival are maintained, allowing them to reproduce. As a consequence species and genetic diversity can be safeguarded.

There are many different ways in which scientists try to conserve biodiversity. They can be divided into two main categories:

in situ conservation - within the natural habitat

exsitu conservation - out of the natural habitat.

In situ conservation

In situ conservation takes place inside an organism's natural habitat. This maintains not only the genetic diversity of species, but also the evolutionary adaptations that enable a species to adapt continually to changing environmental conditions. such as changes in pest populations or climate. By allowing the endangered species to interact with other species, it also preserves the interdependent relationships present in a habitat, therefore interlinked species may also be preserved. In situ conservation is generally cheaper than ex situ conservation. Marine (saltwater). aquatic (freshwater) and terrestrial (land) nature reserves are examples of areas that have been specifically designated for the conservation of wildlife.

Ex situ conservation

Ex situ conservation involves the removal of organisms from their natural habitat. It is normally used in addition to in situ measures. ensuring the survival of a species.

Botanic gardens

Plant species can be grown successfully in botanic gardens. Here the species are actively managed to provide them with the best resources to grow, such as the provision of soil nutrients. sufficient watering, and the removal or prevention of pests. There are roughly 1500 botanic gardens worldwide, holding 35 000 plant species. Although this is a significant number (more than 10% of the world's flora), the majority of species are not conserved. Many wild relatives of selectively bred crop species are under-represented amongst the conserved species. These wild species are a potential source of genes, conferring resistance to diseases, pests. and parasites.

Information

Description
A-level Biology (Module 4: Biodiversity, evolution and disease) Note on Chapter 11: Biodiversity, created by Emily Rowland-Rawson on 03/12/2018.
Created by
Emily Rowland-Rawson · Dec 2018
Updated
Oct 23, 2019
Views
1
History
  • Created by Emily Rowland-Rawson · Nov 23, 2018
  • Copied by Emily Rowland-Rawson · Dec 3, 2018
Rating

Feedback

What is it about?

What do you think of the new look?

How do you like it?