Flashcards
Cloning - M 1-4
Cards in this deck (38)
- 1What is the POU domainPOU domain is the DNA binding domain of oct1 protein - 162 AAs residues 282-443 - oct1 is a ubiquitous transcription factor in mammalian cells - regulates common genes as well as gene specific e.g. immunoglobin in B cells by recruiting co-activators
- 2Features of primers usedRecognition sites added to primer - e.g. Bam HI and Hindi III - palindromic - 6 bases - one every 4kbp
Forward primer identical to 5' end of sense strand, reverse complementary to 3' end - 3How to measure DNA size?Gel electrophoresis - agarose gel - ethodium bromide dye in gel- flat polycyclic molecule which intercalates the DNA causing it to fluoresce more
Standard size DNA molecules used as markers - 100 bp ladder
Take purifies PCR product add loading buffer - contains glycerol - makes sample dense stops it diffusing out of the well into the buffer and blue dye so you can see how far the electrophoresis is going, then water to get final volume
Use Gilson pipette to load into well - also load to DNA ladder
Connect up the apparatus - switch on to ~150 until blue dye has moved - usually 30-45 minutes
Plot data on semi-log graph - length travelled on X and size on y use dna markers to draw line of best fit then estimate your size - 4How to do PCR?Add PCR buffer, dNTPs, distilled water, POUF and POUR primers, plasmid DNA with POU cDNA, taq DNA pol, mix gently then microfuge for 1-2 sec
Place in thermocycler: automatic, does 95 for 1, then 95 for 20, then 58 for 20, then 72 for 20 for 22 cycles, then 72 for 3 min - 5How to purify PCR product?Use QIA quick spin column - silica membrane - binds to single or double stranded DNA more than 100 bp - use in a high salt buffer that contains a high conc of chaotropic salts - disrupt h bonds in water destabilising DNA- water H bonds - DNA binds to silica - wash with high percentage ethanol to remove unbound impurities e.g. primers, dNTPS - then elute DNA with low-slat buffer
Add buffer containing guanidine hydrochloride - chaotropic agent and propan-2-ol -check colour is yellow - buffer has pH indicator if pH too high DNA won't bind - need to add small amount of sodium acetate
place in QIAquick spin in a collection tube - spin fo 1 min - dna binds discard flow through - add high percentage ethanol, spin for 1 min, discard - repeat to remove excess ethanol - put column in new eppenduref tube then add tris-hcl, ph8.5 to elute dna - spin 1 min, stand 1 min - 6How to digest PCR productTake purified pCR product add re buffer has trie-acetate, magnesium acetate and potassium acetate and r.e.s, water, mix gently and spin, incubate at 37 degrees for 30-45 min
Purify product as above - 7How do you set up a ligation?Take pbluescript - has MCS, amp resistance, origin of replication, pLac promoter - lac z' - already cut and treated with alkaline phosphatase
Set up negative control ligation with no insert - ligation buffer, plasmid and water, then an insert one with the same but also digested DNA, then a positive control with the uncut plasmid and water
Then add T4 DNA ligase to all except positive control - mix gently and spin - leave at room temp for 30 mins - 8How do you transform E.coli cells?Take ligation samples place on ice - Add TGI component cells (have been mixed with cacl2 mid log phase ) mix gently - incubate on ice for 15 minutes - heat shock the cheeks in 42 degrees for 1 minute - use pipette to transfer transformed bacteria onto surface of three agar plates - plates contain ampicillin, IPTG and X-gal - turn plates so agar is on top - stops condensation dripping onto surface - incubate overnight at 37 degrees then store at 4 degrees
- 9What other ways can you use to measure DNA size?Velocity sedimentation centrifugation in sucrose gradients
3,000 bp of B-form DNA is 1 micron in length - can measure the length of DNA using electron microscope using techniques which keep DNA in an extended conformation - 10How do we know th POU domain was inserted in correct orientation and how might you confirm?Used directional cloning -but to check could do a restriction digest - chose enzymes that cut asymmetrically within the insert digested product analysed using agarose (pic1)
Alternatively can sequence across insert using primers flanking the insert - 11What other ways are there to make E.coli take up DNAElectroporation - cells grown mid log phase then washed extensively with water to eliminate salts - glycerol added to conc of 10% so that cells can be stored frozen - washed e.coli then mixed with dna and pipetted into a plastic cuvette with electrodes - short electric pulse ~2400 volts/cm is applied causing small holes in mem - DNA enters
- 12Things that can go wrong in pCR-Poor template quality or amount - need DNa with contaminants
- Poor primer design - non-specific bands
- Poor cycling parameters - the number of cycles and annealing temperatures are important
- Buffer composition - need to have right salt content - excess of Mg2+ over dNTP as Mg2+ complexed with dNTPs is essential for dNTP incorporation also is cofactor for the enzymes and it increases the melting temp of DNA and primer/template interactions - too little mg no product, too much and get non-specific bands and very high -no product
- Type of thermostable polymerase - 13How will the protein be expressed?In the E.coli strain BL21(DE3-denotes dna insert for t7 pol) - used as it is deficient in tow proteases (Lon and ompT) which might degrade DNA - plasmid has POU coding sequence under control of T7 promoter - used as it is small, binds to 17bp sequence - high rate of initiation and processivity - lots of mrna
t7 under control of lac
Zero spectrophotometer- add culture to cuvette - measure absorbance at 600nm should be between 0.6 and 0.8 if not leave culture for longer - induce expression of POU domain with IPTG under sterile condition - put in 37 degree shaker for 3 hours - then transfer some into centrifuge and pellet cells for 10 minutes, remove supernatant add remaining culture and repeat then place tube on ice - 14What problem may arise with protein expression?Expressing foreign protein in large quantities can be quite a strain for a bacterial cell - cell division can slow down - so induction is well timed so the bacterial cultures are in late log phase - growing quickly but haven't run out of nutrients - many cells to produce protein - density can be measured using absorbance at 600nm
- 15Analysing nucleic acid structureAll bases in nucleic acids show absorption in the uv region with max absorption around 260nm - H bonding and stacking interactions decrease this absorption
On disrupting secondary structure absorption rises to around 1.4 times its original value - hyper chromic effect
Extra hydroxyl group on the 2' position in the backbone of RNA makes it sensitive to alkali hydrolysis so changes in RNA structures are induced by heating not strong alkaline pH
DNA melting occurs over short temp range due to cooperative nature of unwinding - once small region is separated, the energy needed for next region is reduced - fully reversible under controllable conditions and re-annealed DNA regains all physical and biological properties
Tm = temperature when half DNA has melted - - 16How to investigate unfolding of DNA and RNA at high temperatures?5 buffer: TE, +4 mMNACL, + MGCL, + 100 mM Nacl, + urea where TE is tris-HCL and EDTA
Take buffer and mix with DNA/RNA - mix well as DNA is often viscous - use pipette to transfer into quartz cuvette take absorbance at 260 nm - also measure at 280 zeroing whenever you change the wavelength - the ratio to A260/A280 should be about 2 if the ratio is much lower it indicates that the DNA is contaminated with protein (NAs have absorbance around 280 nm due to aromatic AAs )
To test denaturation mix sample with 3M Naoh and remeasure - then repeat the measurements for the other nucleic acid solutions - the solutions should be in the range 0.3 to 0.6, the A260 for RNA should be around 0.3
To test heating warm samples in a bath and take readings at noted temperatures - keep cuvettes on heat block and allow the to warm up for 2 minutes after rinsing with water - record intervals of 10 degrees for DNA sample and 5 degrees for RNA
Plot results by plotting AT/A0 against T where A0 is absorbance at start and estimate Tm - - 17Why might white or blue colonies be on control plate?Imperfections in the vector - either digestion with one of the two restriction enzymes resulting in blue colonies or from exonuclease contaminants resulting in blunt ends which then can be ligated resulting in white colonies
- 18What results do you get from the denaturation experimentFor TE it is 65 degrees, for TE plus urea =60, TE+ 4mM NaCl = 65, TE +100mM Nacl= 70,TE + 2mM mgcl2 = 80
Both mg and na act as counter ions to reduce repulsion between phosphates in the backbone - mg2+ is more effective as greater charge density
Urea competes for the H bonds between base pairs reducing attraction - 19How did the melting profile for yeyeast RNA differ compare with dsDNAMore gradual increase in A260 results from the melting of RNA - Tm lower - probably because the mean average length of DNA is greater
- 20How to extract the expressed protein?Many labs use sonication - but we use commercial solution called bug buster - mixture of detergents that perforate the cell wall without denaturing the proteins - also add lysozyme which breaks the peptidoglycan layer in bacterial cell walls, also add DNase I - breaks up DNA so when the contents of the cells are released the solution is less viscous - add to defrosted pellet and pipette to resuspend
- 21How is the protein tagged?Both His and MBP tags are present - at high pH, histidine side chains chelate to metal ions immobilised on sepharose
- 22How do you estimate the concentration of protein producedBradford assay - use dye coomassie brilliant blue G250 which is green-brown when free in acid solution and becomes blue upon binding protein - use spectrophotometer to measure intensity of blue colour- conduct standard curve using bovine serum albumin - protein derived from cows - place differing concentrations in cuvette mix gently by inversion and leave to stand for 10 mins
Set spectrophotometer to 565 nm then read samples and make curve plot micrograms BSA on x and A595 on y - 23How to check the success of protein purification?Use gel electrophoresis - large molecules like proteins have Mr between 1kDa and 1MDa
Run on povyacrylamid gels
In the presence of strong ionic detergent sodium dodecyl sulphate proteins are completely unfolded - most bind equal amounts of anionic dodecyl sulphate per gram so behave as polyanions with a constant ratio of negative charge to mass - any difference in charge due to AA side chains are thus obscured - provided that disulphide bonds have been reduced, multimeric proteins are also completely dissociated into their subunits
For a wide range of protein sizes, the speed of migration falls linearly as the logarithm of the Mr of the protein rises so run molecular weight markers at the same time as unknown samples - plot the migration distance vs the log of mr then use line of best fit to estimate for samples - 24How are polyacrylamide gels made?Used to separate proteins - prepared by dissolving acrylamide monomer and across linking agent N,N'-methylenebis-acrylamide in the presence of a suitable catalyst - makes 3d network of long chains of -[CH2-CH2(-CO-NH2)]-n cross linked at regular intervals by methylene groups - makes a porous medium - pore size can be controlled by conc on acrylamide monomer - 5% will separate 100-400 kDa Mr, 15% - 10-100 kDa Mr
- 25Process for preparing his trapTake his trap and shake to resuspend beads - loosen the cap by 1/4 turn and break off the bottom closure - place in an eppendorf tube - pulse in microcentrifuge for 10-20 seconds to remove storage buffer - discard through in eppendorf then replace the column
Use wash buffer (has sodium phosphate, ph7.4, nacl) to wash column - pulse for 30 seconds then discard flow through - 26Process for using his trapOnce 30 min lysis is completecentrifuge for 10 mins at high speed - take supernatant and place in his trap (Keep some supernatant for later testing - S1 and S2) put column into microcentrifuge pulse for 10-20 seconds, discard flow through - wash his trap with wash buffer for 10-20 second pulse - take some flow through for later testing repeat 3 times (W1, W2, W3)
Wash again this time with a buffer that also contains 20 mM imidazole - take sample of flow through for testing - repeat 3 times (W4,W5,W6)
Put trap in new tube and wash with elution buffer - contains 500 mM imidazole - take eluting and add gel loading buffer then repeat (E1 and E2)
Place elutants on ice - 27Process of analysing protein on SDS-polyacrylamide gelTake 10 samples - all with gel loading buffer in and markers and put into 95 degree hot block for 2 minutes - then place in microcentrifuge for 5 minutes then load onto gel and run
Once gel has finished place on tray and pour instant blue stain onto dish then put into the shaking waterbath - you should see the bands developing - stained bright blue against a clear background - take photograph
The results should be for E1 and E2 clear band at 55kDa for the protein - smaller than expected (62) as SDS give and estimate +/- 15% of the true value as proteins binds varying amounts of SDS depending on composition
Other species at 46 and 34 kDa were seen - protein around 70% pure - to get better estimate could run sample with known amounts of protein in separate lanes of the gel
Also - only detecting protein in the stain - there could be other impurities like nucleic acids and carbohydrates - 28What could be the nature of the other proteins that co-elute with the POU domain?Two smaller products probably correspond to degradation products of the fusion protein - as his tag is at N-terminus these must be at c-terminus - one may be the maltose binding protein lacking the POU- the linker between MBP and fusion protein likely to be particularly susceptible to proteolysis
- 29What is the difference between the two washes?The first removes most contaminating proteins, but other proteins in E.coli may be histidine rich and may also bind weakly - the second buffer with imidazole will remove most of these proteins leaving only the required protein
- 30How could the POU domain be purified further?firstly want to separate POU domain from fusion partner - usually cleavage site for an endoprotease such as thrombin in linker - after cleavage MBP can be removed by reapplying sample to a nickel column or affinity column with bound amylose
For subsequent steps you could use gel filtration or ion exchange columns - normally automated machines e.g. FPLC - fast protein liquid chromatography - 31How does separation in gel electrophoresis differ from gel filtration?In gel filtration, molecules with a larger hydrodynamic radius move faster down the column as they are excluded from inside the filtration matrix and pass rapidly through the space around the matrix beads - smaller molecules are retarded as they pass through the inside of matrix - good for separating big molecules like proteins
In gel electrophroesis, smaller molecules move rapidly through gel, whereas larger molecules are retarded - 32How does the POU domain bind DNA?binds to specific 8bp segment of DNA - ATGCAAT - called 'the octamer'
POU domain has two subdomains - homeodomain and POU specific domain - homeo uses helix-turn-helix motif to bind DNA - and are found in several other proteins - but POU specific only in POU - structure of the domain solved by X-ray crystallography - shows that both subdomains bind DNA - 33How can you measure the strength of binding of the POU domain ?Dissociation constant (kd) is useful
p+d --> PD - kd =[P][D]/[PD] - in practice reaction performed with excess protein - so change in preemptively protein concentration in negligible and so input protein conc can be used as [P] - then Kd equals the protein conc when 50% DNA is bound - 34How to test the binding of th e POU sdomain?Compare POU binding to the wild-type with one of three mutated dsDNA or a random DNA strand - mutation 1 = 2bp in POUh - 2 = 2bp in POUs and 3= 4 bp in both -interacting bases
take wt DNA take 6 topes and add wt with differing amount of protein - do the same with mutated/random DNA
Some groups also added 1 micro litre of heparin - a highly-sulphated glycosaminoglycan - acts as a non-specific DNA competitor
Flick tubes gently to mix - spin for 1-2 sex - leave tube at rt for 30 mins to allow protein and dna to bind - 35How will we septerate the DNA from the DNA-complex?DNA-complex slower in gel - the migration detected by staining with sybr gold - a proprietary, asymmetric cyanine dye that exhibits >1000- fold fluorescence on binding to na >100x more sensitive than ethidium bromide
Need to use non-denaturing gel - otherwise the protein-dna complex will not stay together - so noSDS
Pre-run gel - mark the wells of the Gel onto glass plate and remove comb from gel - connect to power - 90V - run gel for 10 mins - removes all traces if ammonium persulphate is used to polymerise polyacrylamide gels + ensures a constant gel temp
After 30 mins add loading buffer to each tube flick and spin -turn off power - take off lid and load samples - replace lid - turn on power supply - run gel until dye about 3/4 of the way down gel then gently remove gel from sandwiched plates - pour star gold into plastic tray - hold gel on plate upside down over tray and then slowly peel off - place dish in shaking waterbath and cover waterbath with lid as stain is light sensitive - the bromophenol blue will lose colour as stain develops - leave for 30 mins then photograph - 36What results were seen for mutants 1 t-3?Mutants 1-3 can form complexes with POU in the absence of heparin with relatively minor effect on Kd
The kd for wild type of octane was ~600 nM - calculated as follows:
6 micro l (ml possible mistake) of protein at 100 micro g/ml in 15 ml = 40 micro grams/ml - since protein is 61600 Da - you want to find molar amount - moles/litre
40 microg/ml = 0.04g/l
0.04g/l divided by 61600 g/mol =6.5 x10-9 mol/ l = 650 nM(mol/l) - this was the amount of protein when half dna bound
For mutant 1 and 2 it took 7-8 micro litre to shift half the DNA complex
mutant 3 is typically 8-9
Random dna did not make the size complex as wt/mutant at any protein concentration - just large smears - 37What was the effect of adding heparin?No complexes are seen with any mutant DNA - only those formed with wt DNA are resistant - so overall conclusion is that POU interacts specifically with the octamer DNA and the POUh and POUs interacting bases make equal contributions to the binding
- 38What other techniques can be used to measure and detect specific interaction between DNA and proteins? Which techniques are applicable to RNA binding and how would the be modified?Footprinting - if RNA use RNase , methylation protection, homology searches also ChiP, UV-crosslinking, NMR chemical shift all can use RNA
methylation not widely used for RNA
Information
- Description
- Biology (Practical notes ) Flashcards on Cloning - M 1-4 , created by Jenna Robinson on 17/04/2017.
- Created by
- Jenna Robinson
- Views
- 1
- Rating