Mind map
Microbial Growth
Map content
Microbial Growth
Growth in Batch Culture
- "Growth" is generally used to refer to the generally used to refer to the acquisition of biomass leading to cell division or reproduction
- A "batch culture" is a closed system in growth medium in which no additional nutrient is added after inoculation of the broth
- Passes through Four Stages:
- 1) Lag Stage
- 2) Log Stage- exponential growth
- 3) Stationary Phase
- 4) Death Stage
- 3) Stationary Phase
- 2) Log Stage- exponential growth
- 1) Lag Stage
Mean Generation Time and Growth Rate
- Growth during log phase is described by the exponential equation Yt= Yoe^ut
- Yt- concentration of bacteria at time t
- Yo- initial concentration of bacteria
- u- specific growth rate in units of min-1
- The mean generation time of doubling time, during log phase is given by the equation td= ln(2) / u
- The doubling time can also be determined from a semilogarithmic plot of growth
- Growth during log phase is described by the exponential equation Yt= Yoe^ut
Measurement of Microbial Growth
- Microscopic Cell Counts
- -Calibrated "Petrol-Hausser Chamber", similar to hemacytometer, can be used -Generally very difficult for bacteria since cells tend to move in and out of counting field -Useful for organisms that cants be cultured -Special stains can be used for specific purposes e.g. serological stains or stains for viable cells
- Serial Dilution & Colony Counting
- -Also known as "viable cell counts" -Concentrated samples are diluted by serial dilution -The diluted samples can be either plated by spread plating or by pour plating CFU= # of colonies counted/ (dilution factor)( volume plated, in mL) Std.D= SqRt # of colonies counted/ (dilution factor)( volume plated, in mL)
- Membrane Filtration
- -Used for samples with low microbial concentration -Sample is filtered through a membrane filter -The filter is placed on nutrient agar medium and incubated -Colonies grow on the filter and can be counted ~0.45um pore size
- Turbidity
- -Based on the diffraction of "scattering" of light by bacteria in a growth culture -Light scattering is measured as optical absorbance in a spectrometer -Optical absorbance is directly proportional to the concentration of bacteria in the suspension
- Mass Determination
- -Cells can be removed from a broth culture by centrifugation and weighed to determine the "wet mass"
- Measurement of Enzymatic Activity or Other Cellular Components
- Microscopic Cell Counts
Continuous Culture
- -A "continuous culture" is an open system is which fresh media is continuously added to the culture at a constant rate, and old broth is removed at the same rate
- - This method is accomplished in a device called a chemostat
- - Typically, the concentration of cells will reach an equilibrium level that remains constant as long as the nutrient feed is maintained
Factors Influencing Growth
- Growth vs. Tolerance
- Growth- refers to the acquisition of biomass leading to cell division, or reproduction
- Tolerance- survive under condition in which they cannot grow
- The suffix "-phile" is often used to describe conditions permitting growth, whereas the term "tolerant" describes conditions in which the organisms survive, but don't necessarily grow
- For example, a "thermophilic bacterium" grows under conditions of elevated temperature, while a "thermotolerant bacterium" survives elevated temperature, but grows at a lower temperature like Giobacillus Thermophilus
- Temperature
- Most bacteria grow throughout a range of approximately 20C, with the maximum growth rate at a certain, "optimum temperature"
- Psychrophiles: Grows well at 0C; optimally between 0C-15C
- Psychrotrophs: Can grow at 0-10C; optimum between 20-30C and maximum around 35C
- Mesophiles: Optimum around 20- 45C
- Moderate thermophiles: Optimum around 55- 65C
- Extreme thermophiles (Hyperthermophiles): Optimum around 80- 113C
- Obligate (Strict) vs. Facultative
- "Obligate" means that given condition is required for growth
- "Facultative" means that the organism can grow under the condition , but doesn't require it. The term is often applied to sub-optimal conditions
- An obligate thermophile requires elevated temperatures for growth, while a facultative thermophile may grow in either elevated temperatures or lower temperatures
- pH
- Acidophiles: Grow optimally between ~pH 0 -5.5
- Neutrophiles: Grow optimally between ~pH 5.5 -8
- Alkalophiles: Grow optimally between ~pH 8 -11.5
- Salt Concentration
- Halophiles require elevated salt concentrations to grow; often require 0.2M ionic strength or greater and some may grow at 1M or greater; example, Halobacterim
- Osmoyolerant (halotolerant) organisms grow over a wide range of salt concentrations or ionic strengths; for example, Staphylococcus aureus
- Oxygen Concentration
- Strict Aerobes: Require oxygen for growth (~20%)
- Strict Anaerobes: Grow in the absence of oxygen; cannot grow in the presence of oxygen
- Facultative anaerobes: Grow best in the presence of oxygen, but are able to grow (at reduced rates) in the absence of oxygen
- Aerotolerant Anaerobes: Can grow equally well in the presence or absence of oxygen
- Microaerophiles: Require reduced concentrations of oxygen (~2-10%) for growth
- Growth vs. Tolerance
Growth in Natural Environments
Quorum Sensing
- A mechanism by which members of a bacterial population can behave cooperatively, altering their patterns of gene expression (transcription) in response to the density of the population
- In this way, the entire population can respond in a manner most strategically practical depending on how sparse of dense the population is
- Mechanism: As the bacteria in the population grow, they secrete a quorum signaling molecule into the environment (for example, in many gram negative bacteria the signal is an acyl homoserine action, HSL)
Information
- Description
- Microbiology (Microbial Control & Growth) Mind Map on Microbial Growth, created by Hope Didier on 23/03/2019.
- Created by
- Hope Didier
- Views
- 3
- Rating