Building Services and HVAC: quizzes, mind maps and notes

Top Building Services and HVAC resources

73 questions
L3 Central Heating Revision According to the Domestic Heating Compliance Guide, a device that takes heat energy from a low-temperature ... gaby khalil
23 questions
AIR 252-001W: Quiz #5 - Unit 77 In the event of a fire, fire dampers prevent oxygen from feeding the fire by Neil Revollo
20 questions
Chapter 5 - Piping, Fittings, and Valves Hydronic heating systems should never use a combination of flexible and rigid piping materials. Neil Revollo
20 questions
Chapter 2 - Heating Load Estimates The design heating load of a building is an estimate of the rate at which a building loses heat during the ... Neil Revollo
7 questions
PPD - Chap. 18 - HVAC Types Select the correct HVAC building systems for apartments. Samuel Stuttard
10 questions
Chapter 4 - Hot Water Heating Systems This forced circulation system is restricted to low heating capacities, is the cheapest to install, and the... Ne Bar
70 nodes
Building Services Engineering Services · Mechanical · Electrical · Hydraulic · Fire Yuting Huang
20 questions
Unit 208: Central heating systems Sample questions In a two pipe central heating system: james crowley

Quizzes

See all 16 quizzes

Mind maps

See all 33 mind maps

Flashcards

See all 11 flashcards

Flowcharts

Untitled Structure Subsystem · EPS Flotation Base · Community Centre · Acrylic Base Plate Dylan Willis

Notes

Topics in Building Services and HVAC

HVAC Design and Energy Efficiency5 Heating Systems9 Ventilation and Indoor Air Quality7 Plumbing and Drainage Systems10 Lifts and Escalators5

About Building Services and HVAC

GoConqr Original

What the resources cover

This page brings together study material on how buildings are heated, cooled, ventilated, drained and powered. The quizzes lean toward heating and mechanical systems. Chapter 2 - Heating Load Estimates asks how a building loses heat, while Chapter 4 - Hot Water Heating Systems looks at forced circulation layouts. Chapter 5 - Piping, Fittings, and Valves covers piping materials and when they can be mixed.

Other quizzes move into ventilation and fire safety. PPD - Chap. 18 - HVAC Types asks you to choose the right system for apartments, and AIR 252-001W: Quiz #5 - Unit 77 covers fire dampers and outside air.

Where to start

Begin with a mind map to see the whole picture. The Building Services map links mechanical, electrical, hydraulic and fire services with ventilation, heating and cooling. The M&E map goes deeper into radiators, convectors, radiant heating, boilers and air conditioning, including constant volume and variable air volume systems.

Then take a quiz on the part you want to firm up:

Heating: L3 Central Heating Revision or Unit 208: Central heating systems Sample questions.
Calculations and design: Chapter 2 - Heating Load Estimates.
Systems and equipment: MEP and MEP Mechanical Review.

Using quizzes and maps together

Read a map first, then answer a quiz on the same theme. When a question surprises you, go back to the matching branch and note what you missed. Short flashcard decks such as Gas Furnaces and Heating System are handy for terms you want to recall quickly.

Maps such as Boilers and Flues, Central heating system and Walls - Loss of heat & Insulation pair well with the heating quizzes. Maps on drainage, plumbing and electrical systems round out the wider picture.

Where this unit sits

This unit belongs to the strand Building Services, Regulation and Performance, within Civil engineering and construction. It suits university students, professional candidates and teachers who want a broad, practical set of material on building systems.

Choose one map that matches your current topic, take a quiz on it, and see which areas to revisit next.

Frequently asked questions

Which quiz should I start with?

If you want heating basics, try L3 Central Heating Revision or Unit 208: Central heating systems Sample questions. If you prefer calculations and design, Chapter 2 - Heating Load Estimates is a good place to begin. For ventilation and fire dampers, look at AIR 252-001W: Quiz #5 - Unit 77.

What do the mind maps cover?

There are over 30 mind maps. They range from broad overviews, such as Building Services and M&E, to focused topics like Boilers and Flues, Ventilation, Drainage, Plumbing System, Electrical System and Indoor air quality. Several cover heat loss and insulation too.

Are the resources free to use?

Yes. Every resource listed on this page is free to open, study and take, with no account needed. They were made by GoConqr users, not by GoConqr itself, so you will see different styles and levels of detail from one resource to the next.

Who is this page for?

It suits university students and professional candidates who want to go over building services topics, along with teachers looking for ready-made material. The resources include heating, ventilation, air conditioning, plumbing and electrical systems, so you can focus on one area or browse across them.

Are there flashcards as well as quizzes?

Yes, there is a small set of flashcard decks. Examples include Gas Furnaces, Heating System and Natural Ventilation 2: envelope flow model. They work well for quick recall of terms after you have read a mind map or finished a quiz.

What if I can't find my topic?

Start with a broader map like Building Services Engineering or MEP - Systems %, since they link several areas together. A free account also lets you save your quiz scores and make your own quizzes, mind maps, flashcards and notes for any topic that is missing.

Building Services and HVAC