Help shape GoConqr. What should we add next?

Flashcards

Amino Acids and pH

Adrianna Bialecka Med Chem and Chem Bio University English 98 cards

What does the titration curve look like for alanine?

Cards in this deck (98)

  1. 1What is a chirality carbon?Carbon that has 4 different substituents attached to the alpha carbon
  2. 2What does Zwitterionic form mean?Ionised in solution
  3. 3Which amino acid is not chiral?Glycine
  4. 4What forms are proteins present in?L forms
  5. 5What do the vertical and horizontal lines represent in a fischer projection?Horizontal= coming out of the plane
    Vertical = behind the plane of the paper
  6. 6How to figure out L and D forms?If amino acid is on left side = L form
    If amino acid is on right side = D form
  7. 7How do you label amino acids R or S?-Assign each substituent a priority based on atomic number
    -If the center is oriented so that the lowest-priority of the four is pointed away from the viewer
    Two possibilities:
    >If the priority of the remaining three substituents decreases in clockwise direction, labelled R
    >If it decreases in counter-clockwise direction, labelled S
  8. 8All but one amino acids are L and also S, which is the exception?Cysteine as it has S which has higher priority than O
  9. 9What amino acids have aliphatic groups?Gly (Enhances flexibility), Ala, Val, Leu, Ile
  10. 10What amino acids have OH group attached?Ser, Thr
  11. 11What amino acids have carboxylic acid?Asp, Glu
  12. 12What amino acid has amide group attached?Asn and Gln
  13. 13What amino acid has amine group attached?Lys, Arg
  14. 14What amino acids have aromatic side chains?His, Phe, Tyr, Trp
  15. 15What amino acids have Sulfur in side group?Met and Cys
  16. 16What amino acid is a cyclic amine?Pro
  17. 17Why are amino acids zwitterions?Contain both an acidic and a basic functionality, an internal acid-base reaction takes place
    -At lower pH the zwitterion accepts a H+ on the basic CO2- group leaving only the positively charged -NH3+
    -At higher pH the zwitterion loses a H+ from NH3+
  18. 18What is the isoelectric point pI?pH at which an amino acid exists mainly in the zwitterionic form.
    At the pI the net charge is O
  19. 19How do we calculate the pI of an amino acid?We use the pKa values of the ionizable groups.
    pI = pKa1 + pKa2/ 2
  20. 20What is the acid dissociation constant?[HA] -> [A-] + [H+]
    Ka = [A-][H+]/[HA]
    pKa = -logKa = log [HA]/[A-][H+]
  21. 21What is the Henderson-Hasselbalch equation?pH = pKa + log[A-]/[HA]
    -When pH = pKa, the two species A- and HA are present in equal amounts as log1=0. This means that at pH values equal to pKa, 50% of the ionizable group will be in fact, ionized. If we know both the pH of a solution and the pKa of an acid HA, we can calculate the ratio of [A-] to [HA] in the solution
  22. 22How do you calculate the percent of ionized species that are present in a 1.00M solution of L-alanine at pH =9.00 . pKa1 = 2.34 and pKa2 = 9.69?pH= pKa + log[A-]/[HA]
    log[A-][HA] = pH -pKa
    = -0.69
    =10^-0.69
    =0.2
    [A-] = 0.2[HA]
    [A-] + [HA] = 1
    0.2[HA] + HA = 1.2
    1.2[HA]= 1[HA] = 0.83 =83%
    [A-] + 0.83 = 1
    So [A-] = 17%
  23. 23What does the titration curve look like for alanine?What does the titration curve look like for alanine?
  24. 24What is the pKa of side chain of Cysteine, -SH?8.3
  25. 25What is the pKa of side chain of Serine, -OH?13
  26. 26What is the pKa of side chain of Threonine, -OH?13
  27. 27What is the pKa of side chain of Tyrosine, -OH?10.1
  28. 28What is the pKa of side chain of Aspartic acid, -COOH?3.9
  29. 29What is the pKa of side chain of Glutamic acid, -COOH?4.3
  30. 30What is the pKa of side chain of Histidine, -Imidazole?6.0
  31. 31What is the pKa of side chain of Arginine, -Guanidino?12.5
  32. 32What is the pKa of side chain of Lysine, -NH3+?10.5
  33. 33How do we calculate the pI of amino acids with ionizable side chains?For the amino acids with either a strongly or weakly acidic side chain, pI is the average of the two lowest pKa values. For the amino acids with a basic side chain, pI is the average of the two highest pKa values
  34. 34What is the titration curve for glutamic acid?What is the titration curve for glutamic acid?
  35. 35How many proteinogenic alpha amino acids are there?20
  36. 36What are amino acids?Building blocks for peptides and proteins by peptide (amide) formation
    (ACID + AMINE give AMIDE + WATER)
    What are amino acids?
  37. 37What are the numerous biological roles of proteins?enzymes, hormones (insulin), structural, transport (haemoglobin), etc.
  38. 38What are the properties of amines?basic - accept a proton
  39. 39What are the properties of acids?acidic - donate a proton
  40. 40In what form are amino acids present in at physiological pH?Zwitterionic form
  41. 41What are oligopeptides?2-10 amino acids
  42. 42What are polypeptides?10-50 amino acids
  43. 43What are proteins?>50 proteins
  44. 44How easily does an amine react with an acid?Does not happen very easily
    An amine and an acid mixed together can behave as proton acceptor and proton donor, depending on the conditions
    aka deprotonate acid and protonates amine
  45. 45What are the steps necessary to chemically synthesize peptides?Activation of -COOH (activate carboxylic group that will be involved in peptide bond formation) and protection of the amine group (protect the RNH2 group that should not be involved in peptide bond formation)
  46. 46What must be added to the reaction to synthesis of the amide bond?Coupling reagents
    -common principle; after activation of the carboxy group of the first amino acids, the second amino acid can form the peptide bond by a nucleophilic attack of its amino group
  47. 47What is the most popular in situ condensing agents?CarbodiimidesWhat is the most popular in situ condensing agents?
  48. 48What is DCC?Dicyclohexyl-carbodiimide where R is a cyclohexaneWhat is DCC?
  49. 49What is the mechanism of action of peptide synthesis?1. The nitrogen in the DCC deprotonates the carboxylic acid of the first amino acid
    2. The deprotonated oxygen attacks the carbon on DCC generating a very intermediate
    3. The carboxylic carbon is electrophilic (delta +) and very prone to reaction with the nucleophilic amine group of the second amino acid
  50. 50What is the mechanism of action of peptide formation?What is the mechanism of action of peptide formation?
  51. 51What is the reactivity of the activated ester comparable to?Acid chlorides and acid anhydrides
  52. 52What is the reactivity scale of carboxylic acid derivatives?What is the reactivity scale of carboxylic acid derivatives?
  53. 53How do you specify which amino acid goes first in sequence?you must block the groups you do not want to react together
    e.g. If the peptide you want to make is the Ala-Gly (the carboxy group of the alanine to react with the amino group of the glycine), you need to PROTECT the amino group of the alanine (i.e. prevent it from reacting) and PROTECT the carboxy group of the glycine
  54. 54How are amine groups protected?Using t-BOC as a protecting group - it generates a carbamate ester which is stable and unreactiveHow are amine groups protected?
  55. 55How are carboxylic acid groups protected?To block a carboxylic group from reacting with DCC, we can generate an ester, which has lost the acidic proton
  56. 56How are the protecting groups removed?choose protecting groups which are orthogonal to one another and require two specific deprotection steps
  57. 57How are amines deprotected?N-Boc deprotected under acidic conditions
  58. 58How are methyl esters deprotected?under basic conditions (followed by acidic work up) - base hydrolysis
  59. 59What are some possible conformations peptides try to assume?Alpha helix, Anti-parallel or parallel beta sheet
  60. 60What are the backbone torsion angles?Phi (φ): The angle around the N-Cα bond.
    Psi (ψ): The angle around the Cα-C bond.
    Omega (ω): The angle around the C-N bond (peptide bond).
    What are the backbone torsion angles?
  61. 61What happens when two or more amino acids combine to form a peptide, the elements of water are removed, and what remains of each amino acid?Amino-acid residue
  62. 62What is an amide bond?in a protein, the peptide bonds connect the carbonyl C of one amino acid (i) amino acid to the alpha amine N of the next (i + 1) amino acid
  63. 63What is the geometry of amide?Similar to alkenes, planar, bond angles of 120 degree due to the conjugation of the nitrogen lone pair with the carbonyl group, looking at the bond length, N-C single bond is 1.45 A, N=C double bond is 1.25 A and the N-C distance in an amide bond is 1.32 AWhat is the geometry of amide?
  64. 64Which conformation is most stable?It is similar to alkenes, where the STERIC STRAIN between the methyl groups on the same side of the double bond (CIS) disfavours the CIS stereoisomer. 76:24 TRANS:CISWhich conformation is most stable?
  65. 65What is the most common cis peptide bonds?X-Pro amid linkages. These bonds still show a preference for trans conformation; however this is less pronounced because the nitrogen of proline is bonded to two tetrahedral carbon atoms, limiting the steric differences between the trans and cis forms. Both cis and trans conformations have more equivalent energies
  66. 66Are there any restrictions in freedom to rotate around the N-Ca and Ca-C bonds?-Extended polypeptide showing planes and phi/psi angles. When the chain is fully extended phi/psi are 180 degree
    -When phi and psi = 0, the two peptide bonds flanking the Cas are in the same plane. This conformation is prohibited since the O of the C=O on one plane and the H of the H-N on the other are overlapping i.e. they approach closer than their van der Waals radii
  67. 67What are the three torsional angles that are most stable than others?What are the three torsional angles that are most stable than others?
  68. 68Which conformation is the lowest in energy as repulsion between the bulkier groups is minimised?ANTI conformation D
  69. 69What two organised arrangements are observed in proteins?Right handed alpha helix and beta sheets
    -stable because they maximize backbone hydrogen bonding, van der Waals interactions of backbone atoms, and minimize steric clashes of backbone and side-chain atoms
  70. 70What is secondary structure?The shape of a folding protein based exclusively on hydrogen bonding between its backbone amide and carbonyl groups. It is 3D, but is a local phenomenon that involves a relatively short string of amino acids. In addition to alpha helices and beta sheets, there are loops and turns that are disordered connecting elements between the structured regions
  71. 71What are alpha helices?An alpha helix is a right handed coil of amino acid residues. Hydrogen bonds between the oxygen of C=O on top coil and the hydrogen of N-H on the bottom coil stabilize the structure. Such a hydrogen bond is formed every 4 amino acid residues, and every complete turn of the helix is only 3.6 amino acid residuesWhat are alpha helices?
  72. 72What are beta sheets?Structure occurs when two or more segments of a polypeptide chain overlap one another and form a row of hydrogen bonds with each other
    This can happen in a parallel or anti-parallel arrangement
  73. 73What does the parallel arrangement look like?The C-terminus end and the N-terminus end are on the same sides for both segmentsWhat does the parallel arrangement look like?
  74. 74What does the anti-parallel arrangement look like?The C-terminus end of one segment is on the same side as the N-terminus end of the other segmentWhat does the anti-parallel arrangement look like?
  75. 75Why are beta sheets pleated-pleats occur because of the alternating planes of the peptide bonds between amino acids; the aligned amino and carbonyl group of each opposite segment alternate their orientation from facing towards each other to facing opposite directions
  76. 76What amino acid types are okay in beta sheets but not in alpha helix?Branch at C beta destabilizes alpha helix
    e.g. Val or Ile
  77. 77What amino acid type also destabilizes alpha helix?No branch at C beta and R group can form H bonds
    e.g. Ser, Asp, Asn
    -this is because the H bond donor/acceptors compete with main chain
  78. 78What amino acid types are okay for alpha helixes?No branch at C beta and R group cant form H bond
    Exception:
    Glycine = too conformationally flexible
    Proline- too rigid
  79. 79What is tertiary structure?The overall three dimensional shape of an entire protein molecule. This includes the spatial relationship of different secondary structures to one another within a polypeptide chain and how these secondary structures themselves fold into three dimensional form of the protein. The tight packing of protein interiors is important for protein stability
  80. 80What forces stabilize a protein?What forces stabilize a protein?
  81. 81What is used for peptide and protein sequencing?Electron Spray Ionization Mass Spectrometry
    (ESI-MS and ESI-MS-MS)
    -it is an essential tool in protein chemistry that is able to analyze proteins and peptide sequences. The identification of the correct sequence of amino acids is relevant to the identification of a protein in physiological samples
    What is used for peptide and protein sequencing?
  82. 82How does ESI-MS work?-A samples is injected into the ESI-MS-MS through a capillary needle and the first step is the IONIZATION of the sample. A voltage is applied between the end of the capillary and a cylindrical electrode. The sample is nebulised, generating a very fine mist of charged droplets. The solvent is evaporated using a drying gas and then low pressure to give charged molecular ions
    -The ions then enter into a first mass filter (MS1) which can be tuned to select the ions of interest to go through to the next step. MS1 contains a quadrupole (four parallel metal rods with applied voltages) which is responsible for the separation of fragments based on their mass-to-charge ratio
    -The selected ion is then taken to a collision cell where argon is used to fragment the analyte, and fragment ions are produced
    -The fragment ions then enter into a time-of-flight mass filter (MS2) which separates them again based on velocity which correlates with their mass-to-charge ratio (light ions travel faster) and they are detected by a detector
  83. 83What is a simple explanation for how the MSI-MS works?What is a simple explanation for how the MSI-MS works?
  84. 84Example of Ala-Val fragmentation?Example of Ala-Val fragmentation?
  85. 85What effect does sequence of the dipeptide have on MS-MS analysis?Fragmentation pattern obtained by fragmentation of Ala-Val is different to that obtained on fragmentation of Val-Ala
  86. 86A peptide has the following sequence: Gly-Ala-AA3-AA4, where AA3 and AA4 are unknown. Predict TWO FRAGMENT ionsA peptide has the following sequence: Gly-Ala-AA3-AA4, where AA3 and AA4 are unknown. Predict TWO FRAGMENT ions
  87. 87Predict fragment ions that are common for the following tetrapeptide Gly-Ala-Ser-ProPredict fragment ions that are common for the following tetrapeptide Gly-Ala-Ser-Pro
  88. 88What does the mass spectrum for Gly-Ala-Ser-Pro look like?What does the mass spectrum for Gly-Ala-Ser-Pro look like?
  89. 89Which are b and which are y ions?b ions= contain N terminal
    y ions= contains C terminal
  90. 90How is the sequence of a peptide determined by subjecting the ionized peptide to fragmentation by collisionally activated dissociation in an MS/MS instrument?Peptides are introduced through an electrospray interface and are protonated form positive ions of the type [M+nH]^+n where n> or = 1.
    -these ions are selected as MS/MS precursors
    -Many product ions may be formed because of bond cleavages along the polypeptide backbone or partial to complete cleavage of amino acid side-chains. Those bond cleavages which occur along the peptide backbone are the most important for sequence determination, particularly b and y ions which result from cleavage of peptide bonds. The neutral losses resulting from formation of b and y ions represent amino acid residue mass and this simplifies interpretation of the MS/MS spectra. The vertical lines show the bond cleavage and the arrows point to the product ions, the remaining portion of the precursor being the neutral loss
    How is the sequence of a peptide determined by subjecting the ionized peptide to fragmentation by collisionally activated dissociation in...
  91. 91What is the application of MS-MS to protein sequencing?Proteins are too big to be analysed directly. With over 100 aa (more commonly a few hundred), pre-digestion into smaller peptides is requiredWhat is the application of MS-MS to protein sequencing?
  92. 92What is Trypsin?Used to cleave proteins for MS-analysis is an example of a protease enzyme
    -proteases hydrolyse peptide peptide bonds in peptides and proteins
    What is Trypsin?
  93. 93How does trypsin cleave proteins?Trypsin cleaves proteins in a specific way, it breaks the bond at the carboxylic side of lysine or an arginineHow does trypsin cleave proteins?
  94. 94What is Chymotrypsin?Another proteases also very specific. It cleaves proteins the peptide bond at the carboxylic side of the aromatic aa Tryptophan, phenylalanine or tyrosine
    -Both trypsin and chymotrypsin are example of serine proteases
  95. 95What is the first step in chemotrypsin protein hydrolysis?What is the first step in chemotrypsin protein hydrolysis?
  96. 96What is the second and third step in chemotrypsin protein hydrolysis?What is the second and third step in chemotrypsin protein hydrolysis?
  97. 97What is the fourth and fifth step in chemotrypsin protein hydrolysis?What is the fourth and fifth step in chemotrypsin protein hydrolysis?
  98. 98—

Information

Description
University Med Chem and Chem Bio (Amino Acids) Flashcards on Amino Acids and pH, created by Adrianna Bialecka on 20/01/2025.
Views
0
Rating

More on Amino acid ionization and charge

Feedback

What is it about?

What should we add next?