Help shape GoConqr. What should we add next?

Flashcards

Geology and man second test

Alaina Hamlett Geology English 174 cards

Cards in this deck (174)

  1. 1Sedimentary rocksproduced from WEATHERING PRODUCTS of pre-existing rocks or accumulated
    (detrital rocks/chemical rocks/organic rocks)
  2. 2detrital rocksrocks that are produced from rock fragments
    - most common / cemented sediment grains from pre-existing rocks
    - Breccia and Conglomerate are both coarse grained clastic sedimentary rocks.
    - Breccia composed of coarse, angular rock fragments
    - Conglomerate composed of rounded gravel Sandstone
    - fine grained rocks : shale, siltstone, claystone, mudstone
  3. 3chemical rocksrocks that are produced by precipitation of dissolved ions in water
    - crystalline textures / form by precipitation of minerals from solution
    (Carbonate Rocks)
    • Contain C O3 as part of their chemical composition.
    • Most are biochemical, but can be inorganic.
    • often contain easily recognizable fossils.
    • Limestone is composed mainly of calcite, Susceptible to recrystallization.
    • Dolomite chemical alteration of limestone in Mg-rich water solutions can produce dolomite.
    - ALSO CHERT AND EVAPORITES ARE EXAMPLES
  4. 4organic rocksrocks produced by accumulation of biological debris, such as in swamps or bogs
    Coal – sedimentary rock formed from compaction of partially decayed plant material
    • Organic material deposited in water with low oxygen content (that is, stagnant).
  5. 5sedimentary rocks are economically importantStone, concrete, silica, gypsum, iron, and other building materials are
    quarried and mined from sedimentary rocks.
    • Salt is a sedimentary product.
    • Fresh water is often pumped from layers of sedimentary rock.
    • Coal, oil, and natural gas are formed and extracted from sedimentary rock.
  6. 6sedimentloose, solid particles originating from
  7. 7sediment transportationMovement of sediment away from its source, typically by water, wind, or ice
  8. 8roundingof particles occurs due to abrasion during transport.
  9. 9sortingoccurs as sediment is separated according to grain size by transport agents, especially running water.
  10. 10sediment depositionTransported material settles and comes to a rest
    • Accumulation of chemical or organic sediments, typically in water.
  11. 11enviornment of depositionis the location in which deposition occurs
    Deep sea floor.
    • Beach.
    • Desert dunes.
    • River channel.
    • Lake bottom.
  12. 12preservationSediment must be preserved, as by burial with additional sediments, in order to become a sedimentary rock.
  13. 13lithificationGeneral term for processes converting loose sediment into sedimentary rock.
    ● Combination of compaction and cementation.
  14. 14medium grained clasticsedimentary rock types determined by composition
    • Quartz sandstone – >90% quartz grains.
    • Arkose – mostly feldspar and quartz grains.
    • Graywacke – sand grains surrounded by dark, fine-grained matrix, often clay – rich.
  15. 15shalefine-grained clastic sedimentary rock;
    fissile (splits into thin layers)
    • Silt – and clay-sized grains.
    • Sediment deposited in lake bottoms, river deltas, floodplains, and on deep ocean floor.
  16. 16siltstoneslightly coarser-grained than shale; non-fissile
  17. 17claystonepredominantly clay – sized grains; non-fissile
  18. 18mudstonesilt – and clay – sized grains; massive/blocky
  19. 19chertHard, compact, fine-grained, formed almost entirely of silica.
    • Can occur as layers or as lumpy nodules within other sedimentary rocks, especially limestone.
  20. 20evaporitesForm from evaporating saline waters (lake, ocean).
    • Common examples are rock gypsum, rock salt.
  21. 21oil and natural gasOriginate from organic matter in marine sediment
    Diatoms and single – celled algae settle to sea floor
    Oxygen poor waters preserve the organic material
    Higher temperatures convert organics to oil and gas
    Accumulates in porous overlying rocks
  22. 22sedimentary structuresFeatures within sedimentary rocks produced during or just after sediment deposition
    ● Provide clues to how and where deposition of sediments occurred.
    - BEDDING/CROSS BEDDING/RIPPLE MARKS/GRADED BEDDING/MUD CRACKS/FOSSILS
  23. 23beddingSeries of visible layers within a rock.
    ● Most common sedimentary structure.
  24. 24cross-bedding● Series of thin, inclined layers within a horizontal bed of rock.
    ● Common in sandstones.
    ● Indicative of deposition in ripples, bars, dunes, deltas.
  25. 25ripple marksSmall ridges formed on surface of sediment layer by moving wind or water.
  26. 26graded beddingProgressive change in grain size from bottom to top of a bed
  27. 27mud cracksPolygonal cracks formed in drying mud
  28. 28fossils• Traces of plants or animals preserved in rock.
    • Hard parts (shells, bones) more easily preserved as fossils.
  29. 29formationsA rock body of considerable thickness that is large enough to be mapped.
    • Often based on rock type.
    • Must have a visible characteristic that makes it a recognizable unit.
    • Given proper names such as the Anastasia Formation or Ocala Limestone.
  30. 30contacta boundary surface between two different rock types or ages of rock.
  31. 31sedimentary rocks give important clues to the _________ _______ of an areageologic time
  32. 32source areaLocality that eroded and provided sediment.
    • Sediment composition, shape, size and sorting are indicators of source rock type and relative location.
  33. 33enviornemnt of depositionlocation where sediment came to rest
    • Sediment characteristics and sedimentary structures (including fossils) are indicators.
    • Glacial Environments, Alluvial Fans, River Channels, Floodplains, Lakes, Deltas, Beaches, Lagoon, Shallow Marine Shelves, Reefs, Deep Marine.
  34. 34transgressionsea level rises and marine sedimentary deposits will migrate onto the subsided land areas.
  35. 35regressionsea level falls and the sedimentary deposits will migrate away from the land areas.
  36. 36tectonic plate boundaryErosion rates and depositional characteristics give clues to each type of
  37. 37metamorphismrefers to solid-state changes to rocks in Earth’s interior
    • Produced by increased heat, pressure, or the action of hot, reactive fluids.
    • Old minerals, unstable under new conditions, recrystallize into stable ones.
  38. 38rocks produced from pre-existing or ______ in this way are called _________parent rocks / metamorphic rocks
  39. 39cratonsMetamorphic rocks common in the old, stable cores of continents, known as
  40. 40metamorphic rocksTexture and mineral content of metamorphic rocks depend on:
    • Parent rock composition.
    • Temperature and pressure during
    metamorphism.
    • Effects of tectonic forces.
    • Effects of fluids, such as water.
    Parent rock composition
    • Usually no new material is added to rock during metamorphism.
    • Resulting metamorphic rock will have similar composition to parent rock.
  41. 41temperatureThe heat for metamorphism comes from Earth’s deep interior
    • All minerals stable over finite temperature range, if range exceeded, new minerals result.
    • If temperature gets high enough, melting will occur.
  42. 42pressureConfining pressure applied equally in all
    directions.
    • Pressure proportional to depth within the Earth.
    • High-pressure minerals more compact/dense.
    - differential stress/compressive stress/shearing
  43. 43differential stresscreated by forces that are not equal in all directions
  44. 44compressive stresscauses flattening perpendicular to stress
  45. 45shearingcauses flattening by sliding parallel to stress
  46. 46foliationplanar rock texture of aligned minerals produced by differential stress ● Formed by differential stress.
  47. 47fluidsHot water (as vapor) is most important.
    • Rising temperature causes water to be released from unstable minerals.
    • Hot water very reactive; acts as rapid transport agent for mobile ions.
  48. 48timeMetamorphism, particularly from high pressures, may take millions of years.
    • Longer times allow newly stable minerals to grow larger and increase foliation.
  49. 49nonfoliated metamorphic rocksNon Foliated rocks are named based on composition
    • Marble – coarse grained rock composed of interlocking calcite crystals.
    • Quartzite – produced when grains of quartz sandstone are welded together.
    • Hornfels – fine grained rock typically composed of microscopically visible micas formed from the clay particle in shale.
  50. 50foliated metamorphic rocksFoliated rocks are named based on the type of foliation (slate, schistose, gneissic) • Slate, Phyllite, Schist and Gneiss.
  51. 51contact metamorphismis a type of metamorphism that occurs adjacent to intrusive igneous rocks due to temperature increases resulting from hot magma intrusion into the rock.
    • High temperature is dominant factor.
    • Produces non-foliated rocks. Because contact metamorphism is not caused by changes in pressure or by differential stress , contact metamorphic rocks do not become foliated.
    • Occurs in narrow zone (~1-100 m wide) known as contact aureole.
    • Rocks may be fine- (for example, hornfels) or coarse-grained (for example, marble, quartzite).
  52. 52hydrothermal metamorphismrocks precipitated from or altered by hot water
    • Common at divergent plate boundaries. Hydrothermal processes:
    • Metamorphism.
  53. 53metasomatismchange in the composition of a rock as a result of the introduction or removal of chemical constituents.
  54. 54hydrothermal processes and ore depositsWater passes through rocks and precipitates new minerals on walls of cracks and in pore spaces.
    • Metallic ore deposits often form this way (veins).
  55. 55regional metamorphismoccurs over wide areas and deep in the crust
    • High pressure is dominant factor.
    • Results in rocks with foliated textures.
    • Prevalent in intensely deformed mountain ranges.
    • May occur over wide temperature range.
  56. 56shock metamorphismis produced by rapid application of extreme pressure
    • Meteor impacts produce this.
    • Shocked rocks are found around and beneath impact craters.
  57. 57minerals present in a metamorphic rock indicate its ___________metamorphic grade
  58. 58prograde metamorphismas a rock is buried to greater depths it is subject to greater temperatures and pressures causing recrystallization into higher grade rocks.
  59. 59low-grade metamorphism with low temps and pressuresEx. the common sedimentary rock shale becoming
    more compacted into slate
  60. 60high-grade metamorphism with strong compressional forces, high temperatures and pressuresEx. granite being formed and folded into gneiss
  61. 61regional metamorphism asscaiated with ________________convergent plate boundaries
    Differential stress.
    • Gravitational collapse and spreading.
  62. 62temperature varies laterally at convergent boundaries● Isotherms bow down in sinking oceanic plate and bow up where magma rises.
    ● An isotherm is a line on a map connecting points having the same temperature at a given time or on average over a given period.
    ● Wide variety of metamorphic facies.
    ● A metamorphic facies is a set of mineral assemblages in metamorphic rocks formed under similar pressures and temperatures
  63. 63catastrophism- claims that Earth's varied landscapes have been fashioned primarily by great castatrophes
    - distingushed during the 1600s-1700s
    - idea was made to fit the rate of earth's processes
  64. 64uniformitarianism- states the physical, chemical and biological laws that operate today have been also operated in the geology past
  65. 65numerical and abosulte datesgive specific (exact) number of years that have been passed since an event occurred
  66. 66relative datesdistingueshes when rocks formed determined by the sequence of formation labeling which formed first / second / last
  67. 67fundamental principles of relative datingSuperposition
    Original Horizontality
    Lateral Continuity
    Cross-Cutting Relationships
    Inclusions
    Fossil Succession
    - used to determine the relative geologic ages and for interpreting earth history
  68. 68principles of superpositionSuperposition states that , in an undisturbed succession of sedimentary layers, the oldest layer is on the bottom and the youngest layer is on the top.
  69. 69principle of original horizontalityOriginal horizontality states that sediment is originally deposited in horizontal layers.
  70. 70principle of lateral continuitySediment extends laterally in all directions until it thins and pinches out or terminates against the edge of a depositional basin.
  71. 71principle of cross-cutting relationshipsAn igneous intrusion must be younger than the rock it intrudes.
    Also, faults must be younger than the rocks they displace.
  72. 72principle of inclusionsInclusions in a rock are older than the rock layer itself.
  73. 73principle of fossil successionStates that groups of fossils appear in a chronological order through their vertical placement in sedimentary rocks
    - Can use fossils to determine the age of the surrounding sediment dependent on the time period in which overlapping species were extant
  74. 74unconformitiesrepresent a long period during which deposition ceased, erosion removed previously formed rocks, and then deposition resumed.
    types (Angular/Disconformity/Nonconformity)
  75. 75angularconsists of tilted or folded sedimentary rocks that are overlain by younger, flat-lying strata
  76. 76disconformitya gap in the rock record that represents a period during which erosion rather than deposition occured
  77. 77nonconformityyounger sedimentary strata overlies older metamorphic or intrusive igenous rocks
  78. 78fossilsthe remains or traces of prehistoric life
  79. 79paleontologythe scientific study of fossils
  80. 80perminerlezationwhen mineral rich groundwater permeates porous tissue such as bone or wood
  81. 81moldscavity in the rock of the fossil impression
  82. 82castsis the object created when sediment fills a mold and becomes a rock
  83. 83amberHardened resin of ancient trees can preserve organisms such as insects in their three dimensional form
  84. 84trace fossilsindirect traces of life, such as footprints, burrows, coprolites(fossilized dung), and gastroliths(stomach stones)
  85. 85correlationCorrelating the rocks from one place to another makes possible for a more comprehensive view of the geologic history of a region
  86. 86radioactive decayRadioactive isotopes are unstable and can change spontaneously to a different isotope or element by absorbing or emitting one or more particles from their nuclei, therefore we say they are undergoing _____________
  87. 87radiometric datingcalculates the age of rocks and minerals that contain particular radioactive isotopes.
    We commonly measure this is Half-lifes, which is the time required for one-half of the nuclei in a sample to decay.
  88. 88Paleozoicancient life
  89. 89mesozoicmiddle life
  90. 90cenozoicrecent life
  91. 91Phanerozoicvisible life
  92. 92mass waistingis the downhill movement of masses of bedrock, rock debris, or soil driven by the pull of gravity
  93. 93landslideshave cost Americans triple the combined costs of earthquakes, hurricanes, floods, and tornadoes.
  94. 94gravitythe driving force for mass wasting
    •Normal Force.
    •Shear Force.
    •Shear Resistance.
    Shear resistance < shear force = landslide
    Steep slopes – shear forces maximized by gravity
  95. 95shear strengthresistance to movement or deformation
    Saturated soil has reduced shear strength due to increased pore pressure.
    However, a small amount of water in soil can prevent downslope movement.
    Like building a sandcastle.
  96. 96mass waisting triggers•Seismic (earthquake) activity.
    •Heavy Rainfall.
    •Construction.
    •Lack of vegetation – no roots to hold rock/soil in place.
  97. 97rate of movement of mass waisting< 1cm/year – >100 km/hour.
  98. 98type of material for mass waistingSolid bedrock or debris (unconsolidated material at Earth’s surface).
  99. 99flow- liquidify (slushy flow)
    - descending mass moves downhill as a viscous fluid
  100. 100slide- translational slide
    - rotational slides
    - descending mass remains relatively intact, and descends along well-defined surfaces
  101. 101translational slide- blocks slide down slope (keeping it whole detaching block by block)
    - movement along plane PARALLEL to motion
  102. 102rotational slidefold / slide like a deck of cards (rotation to it - itself)
    - movement along a curved surface
  103. 103falllost detachment
    - material free-falls or bounces down a cliff
  104. 104creepvery slow downslope movement of soil
    •Major contributing factors include water in soil and daily freeze – thaw cycles.
    •Can be costly to maintain homes, etc., on creeping ground as foundations, walls, pipes and driveways crack and shift downslope over time.
  105. 105earthflowdebris moves downslope, slowly or rapidly, as viscous fluid
  106. 106solifluction permafrost- flow of water ; saturated soil over impermeable material
  107. 107debris flow and mudleflowflowing mixture of debris and water, usually down a channel.
    Mudflow is only soil and water.
    Debris Avalanches are very rapid and turbulent.
  108. 108rockfalla block of bedrock breaks free and falls or bounces down a cliff
  109. 109rockslide and rock avalanchethe rapid sliding of a mass of bedrock along an inclined surface of weakness
  110. 110underwater landslides- turbidity currents
    - can create a tsunami
  111. 111preventing rockfalls and rockslides on highwaysRemove Loose material.
    Stitch slopes together.
  112. 112preventing mass wasting in soilConstruct retaining wall with drains.
    Don’t oversteepen slopes during construction.
    Remove all rock that is prone to sliding.
    Add vegetative cover.
    Cover roads.
  113. 113the hydrologic cyclethe movement and interchange of water between the sea, air, and land
  114. 114evaporationsolar radiation provides energy
  115. 115precipitationrain or snow
  116. 116transpirationevaporation from plants
  117. 117runoffwater flowing over land surface
  118. 118infiltrationwater soaking into the ground
  119. 119streama body of running water, confined to a channel, that runs downhill under the influence of gravity
  120. 120headwatersupper part of stream near its source in the mountains
  121. 121mouthplace where a stream enters sea, lake or larger stream
  122. 122channela long, narrow depression eroded by a stream into rock or sediment
  123. 123stream bankssides of channel
  124. 124streambedbottom of the channel
  125. 125floodplainflat valley floor composed of sediment deposited by the stream
  126. 126drainage basinthe total area drained by a stream and its tributaries
  127. 127tributarya small stream flowing into a larger one.
  128. 128divideridge or high ground that divides one drainage basin from another
  129. 129continental divideseparates the streams that flow into the Pacific from those that flow into the Atlantic and Gulf of Mexico
  130. 130drainage patternthe arrangement, in map view, of a stream and its tributaries
    Most tributaries join the main stream at an acute angle, forming a V or Y pointing downstream
  131. 131dendriticdrainage pattern resembling the branches of a tree.
  132. 132radial patternstreams diverge outward like the spokes of a wheel, such as on conical mountains.
  133. 133rectangular patterntributaries have frequent 90° bends and join other streams at right angles.
  134. 134trellis patternparallel streams with short tributaries meeting at right angles
  135. 135Factors affecting strea erosion and deposition1. velocity : •Maximum velocity near center of channel.
    •Higher stream velocities promote erosion and transport of coarser sediments.
    •Floods involve increased velocity and erosion.
    2. gradient (slope)
    3. channel shape and roughness
    4. Discharge : volume of water passing a particular point in a stream over time
  136. 136hydraulic actionability to pick up and move rock and sediment.
  137. 137solutiondissolving of rocks
  138. 138abrasiongrinding away of stream channel by the friction and impact of the sediment load
  139. 139potholesare eroded into streambed by the abrasive action of the sediment load in the stream
  140. 140traction loadlarge particles that travel along the streambed by rolling, sliding or dragging.
  141. 141saltation loadmedium particles that travel by bouncing along.
  142. 142dissolved loaddissolved ions produced by chemical weathering of soluble minerals upstream
  143. 143suspended loadsmall/light sediment that remains above the stream bottom by turbulent flow for an indefinite period of time
  144. 144bed loadlarge or heavy particles that travel on the streambed
  145. 145point barssediments temporarily deposited along stream course
  146. 146placer depositsconcentrated heavy sediment
  147. 147braided streamscontain sediment deposited as numerous bars around which water flows in highly interconnected rivulets
    •Resembles braids of hair or rope.
    Common for streams carrying a lot of sediment
  148. 148meandersrivers that develop pronounced, sinuous curves
  149. 149cut bankswater flows faster along the outside of the bends causing erosion and created these
  150. 150meander cutoffsmay form when a new, shorter channel is cut through the narrow neck of a meander (as during a flood)
  151. 151oxbow lakecurved lake formed at a former oxbow where the main stream of the river has cut across the narrow end and no longer flows around the loop of the bend.
  152. 152floodplainsare broad strips of land built up by sedimentation on either side of a stream channel
  153. 153floodplain sedimentsare left behind as flood waters slow and recede at the end of flood events.
  154. 154natural leveesMain channel has slightly raised banks with respect to the floodplain known as
  155. 155deltabody of sediment deposited at the mouth of a river when flow velocity decreases
  156. 156surfaced marked by shifting _______ channelsdistributary
  157. 157shape of delta depends on whether its _______________wave-dominated/tide dominated/stream-dominated
  158. 158alluvial fanlarge, fan – or cone-shaped pile of sediment that forms where stream velocity decreases as it emerges from a narrow mountain canyon onto a flat plain
    •Well – developed in desert regions, such as the southwestern U.S.
    •Larger fans show grading from large sediments nearest the mountains to finer sediments farther away.
  159. 159valleysare the most common landform on Earth
    •Formed by stream erosion.
    •Different valley morphologies depend on the erosional processes that created them.
  160. 160downcuttingprocess of deepening a valley by erosion of the streambed
  161. 161V-shaped valleystypically form from downcutting combined with mass wasting and sheet erosion.
  162. 162streams cannot erode below their ________base level
  163. 163graded streamshave concave-up longitudinal profile, lack rapids and waterfalls, represent a balance between available sediment load and transport capacity
  164. 164lateral erosionwidens stream valleys by undercutting of stream banks and valley walls as stream swings from side to side across the valley floor
  165. 165headward erosionthe slow uphill growth of a valley above its original source by gullying, mass wasting, and sheet erosion
  166. 166stream terracesstep – like landforms found above a stream and its floodplain
    •Occurs when river rapidly cuts downward into its own floodplain.
    Represents relatively sudden change from deposition to erosion.
    •Can be caused by rapid uplift, drops in base level, or climate changes.
  167. 167incised meandersRetain sinuous pattern as they cut vertically downward.
    •May be produced by profound base level changes, as when rapid tectonic uplift occurs.
  168. 168when water levelsrise and overtop the banks of a river, _______ occursflooding
  169. 169high velocity and large volume of water causes _____ _______flood erosion
  170. 170urbanizationcreates many impermeable surfaces (pavement) which increases flooding
    - water is delievered to streams faster through sewers which increases peak discharge making river levels higher during storms
  171. 171flash floodsare local, sudden floods of large volume and short duration
    - typically triggered by heavy rainstorms
  172. 172damsdesigned to trap flood waters in reservoirs upstream and release it gradually over time
  173. 173artifical leveesdesigned to increase capacity of river channel and works well until stream overtops levees, leading to extremely rapid flooding and erosion
  174. 174wise and land-use planningincluding prevention of building within 100-year floodplains, is most effective

Information

Description
Geology Flashcards on Geology and man second test, created by Alaina Hamlett on 08/03/2025.
Created by
Alaina Hamlett
Views
3
Rating

More on Rock Classification

Feedback

What is it about?

What should we add next?