Boilers, Steam Systems and Power Plants
64 resources created by 34 users
This Boilers, Steam Systems and Power Plants page on GoConqr gathers community-made quizzes, mind maps and flashcards, from boiler fittings and fired heaters to steam turbines, gas turbine plants and wind turbine design. It's built for university students and professional candidates practising plant knowledge and code questions, and for teachers after ready-made material. There are over 60 resources here, including more than 40 quizzes and over 10 mind maps. Pick a topic, try a quiz to find your gaps, then keep going at your own pace.
Top Boilers, Steam Systems and Power Plants resources
-
33 questionspower prep Steam turbine Auxiliaries and Operation quiz
-
10 questions3.5 High Pressure Boiler Fittings The internal feed pipe: 1. Serves to distribute the incoming feedwater uniformly along the length of the dr...
-
10 questions4.7 Cogeneration Systems and Operation The benefits of a combined-cycle with a single shaft gas/steam turbine arrangement are: 1. High level of th...
-
13 questionsPED-Quiz What does PED mean?
-
57 questions07 Gas Turbine Power Plant Power Plant Quiz on 07 Gas Turbine Power Plant, created by Kyllie Kylle on 14/09/2016.
-
10 questions4.13 Fired Heaters A Eutectic salt solution used as a heat transfer medium in an indirect heater is a mixture of:
-
27 questionsPower prep material The two classifications of steam turbines include:
-
12 questions4.1 Steam Turbine Principles and Design
Quizzes
See all 42 quizzes-
33 questionspower prep Steam turbine Auxiliaries and Operation quiz
-
10 questions3.5 High Pressure Boiler Fittings The internal feed pipe: 1. Serves to distribute the incoming feedwater uniformly along the length of the dr...
-
10 questions4.7 Cogeneration Systems and Operation The benefits of a combined-cycle with a single shaft gas/steam turbine arrangement are: 1. High level of th...
-
13 questionsPED-Quiz What does PED mean?
-
57 questions07 Gas Turbine Power Plant Power Plant Quiz on 07 Gas Turbine Power Plant, created by Kyllie Kylle on 14/09/2016.
-
10 questions4.13 Fired Heaters A Eutectic salt solution used as a heat transfer medium in an indirect heater is a mixture of:
-
27 questionsPower prep material The two classifications of steam turbines include:
-
12 questions4.1 Steam Turbine Principles and Design
Topics in Boilers, Steam Systems and Power Plants
More Mechanical engineering topics
About Boilers, Steam Systems and Power Plants
GoConqr OriginalWhat this unit covers
The unit follows a plant from the boiler to the turbine and beyond. Boiler quizzes include 3.2 special Boiler Designs, 3.3 Boiler construction and 3.5 High Pressure Boiler Fittings, which asks about the internal feed pipe and its role in the drum. The Class 5 series works through watertube boilers, firetube boilers, low water fuel cut-offs, programming controls and operation and maintenance.
Steam, turbines and power plants
For the turbine side, look at 4.1 Steam Turbine Principles and Design and the quiz on steam turbine auxiliaries and operation, which covers the lubricating oil system. 4.7 Cogeneration Systems and Operation looks at combined-cycle arrangements, and 07 Gas Turbine Power Plant covers how a gas turbine gets its energy from combustion. 4.13 Fired Heaters covers indirect heaters and their heat transfer fluids.
Codes and inspection
Several quizzes suit candidates working on codes. The API 510 set includes a module on ASME Section VIII with maths questions on corroded vessel thickness, plus a miscellaneous module. PED-Quiz asks what the Pressure Equipment Directive means and where it applies. The ASME PRV flashcards are a quick companion.
Where to start
- Skim the Boilers and Boiler classifications mind maps for the big picture.
- Take a design or fittings quiz, such as 3.3 Boiler construction.
- Move on to turbines and plant quizzes.
- Finish with code and inspection questions.
Use maps first to see how parts connect, then quizzes to test what stuck. Wrong answers show which map to revisit.
Where it sits
This unit belongs to the Energy Conversion Systems strand of Mechanical engineering. The wind turbine mind maps, such as Wind turbine parts, show a different way of turning energy into power. Choose one quiz today and see how far you get.
Frequently asked questions
Which quiz should I start with?
If boilers are new to you, try 3.3 Boiler construction or 3.2 special Boiler Designs, then move to 3.5 High Pressure Boiler Fittings. If you already know the basics, jump to the steam turbine or cogeneration quizzes. Each quiz is quick to open, so you can test a topic and move on.
Are there resources for API 510?
Yes. The page lists an API 510 module on ASME Section VIII, including maths questions about corroded pressure vessel thickness, and another on API miscellaneous topics. The ASME PRV flashcards and the PED-Quiz are useful for related code and directive questions.
What do the mind maps cover?
The mind maps include Boilers, Boiler classifications and Specialized Boiler Designs, along with Pipe Fittings and Chemical Dosing Pumps. There are also several on wind turbines, such as the aerodynamics map covering lift and drag. Use them to get an overview before you take a quiz.
Who is this page for?
It suits university students and professional candidates practising boiler, steam and plant questions, as well as teachers looking for ready-made material. Many of the quizzes follow exam-style questions, so they work well for checking recall and spotting weak areas.
Are the resources free, and who made them?
Every resource listed here is free to open, study and take, with no account needed. They were made by GoConqr users, not by GoConqr itself. A free account also saves your quiz scores and lets you make your own quizzes, mind maps, flashcards and notes.
What if I can't find the topic I need?
Check the neighbouring resources first, as piping, pumps and wind turbine design sit alongside the boiler material. If a topic is still missing, you can build your own quiz, mind map or flashcards with a free account and keep them for revision.