Digital Logic and Digital Design flashcards
67 flashcard decks by 50 users · Page 1 of 2
This GoConqr page gathers over 50 flashcard resources on Digital Logic and Digital Design, covering logic gates, truth tables, adders and design. They offer university students and school students material to practice, and teachers resources to use with a class. Browse the decks and pick a topic to start with.
Select topic
- Boolean Algebra15
- Logic Gates and Truth Tables34
- Karnaugh Maps and Logic Simplification5
- CMOS Logic and Logic Families10
- Combinational Logic Circuits6
- Latches and Flip-Flops7
- Sequential Circuits and State Machines12
- Registers and Counters6
- Verilog and VHDL6
- Programmable Logic Devices and FPGAs7
- Digital IC Design and Timing8
Flashcards
-
5 cardsNAND Equivalence Identify the equivalent gate from the NAND-gate circuits
-
131 cardsCS219 - Midterm 2 What will be the output voltage if we apply A = Vcc and B = 0 (ground)?
-
47 cards06 handout 1 is a circuit that has multiple inputs (sources) and a single output (destination).
-
41 cards01Handout01 is a set of notations, similar to software programming languages, used for modeling the logical function of...
-
34 cards02Handout01 is designed by using some IC. The input to any digital circuit is in binary form. These circuits can be rep...
-
17 cardsDigital Design Flashcards What are the 7 stages of ASIC Design Flow?
-
48 cardsDTEC S1 Flashcards What is the Least Significant Bit (LSB)?
-
36 cards19: Logic Circuits and Boolean Algebra What does chapter introduce?
-
37 cards03Handout01
-
31 cardsWeek 2 4 Logic Gates
-
51 cardsLogic Finals circuits whose outputs depends on the sequence of inputs applied and are analyzed with respect to time
-
52 cardsCSE 120 Lecture 02
-
39 cardsDigital Electronics Midterm Study Guide Which of the answers below states 17500000 in proper scientific notation?
-
15 cardsClock Skew / CTS What are the main causes of clock skew?
-
11 cardsTiming Flashcards What are 4 methods of reducing propagation delays in a digital logic circuit to achieve positive slack.
-
21 cardsLecture 4 - COMP12111 What are the two logic functions in a half-adder?
-
17 cardsXilinx FPGA - Lecture 2 What Xilinx FPGAs contain ? (Basic resources)
-
6 cardsFPGA Architecture
-
20 cardsCSE 120 Lecture 08
-
14 cardsDigital and Embedded systems - Programmable logic what is a PLD draw what it looks like
-
10 cards03 Handout 1
-
9 cardsDigital Timing
-
17 cardsY12 principles of Electronic and Electrical Engineering Unit 6 DC 1 Definition of a Digital Circuit
-
13 cardsCSE 120 Lecture 03, 04
-
9 cardsAdders and Flip Flops 4.6
-
10 cardsCSE 120 Quiz 3 Flashcards contains all cases of state, inputs, and outputs
-
7 cardsCAD Notes List the system-level design techniques.
-
7 cardsSynchronous sequential design with the aid of a diagram explain what is combinational logic?
-
20 cards6. Logic Systems
-
8 cardsLogic gates
-
6 cardsDigital Electronics (UNIT 4)
-
14 cards04Handout01 are defined to work on specific data types and that not all operators are synthesizable.
-
19 cardsPLC Chapter 4 - Fundamentals of Logic What does Binary refer to?
-
9 cardsEven More Logical What can a truth table be made with more of?
-
7 cardsDigital and Embedded systems - Counters list 3 facts about Asynchronous Counters
-
5 cardsDigital flash 2 whats the difference between synchronous and Asynchronous logic circuits
-
2 cardsUntitled xperimenting with home made computers usually results into the use of a pletora of discrete TTL IC in order...
-
4 cardsASIC Definitions - Basic ASIC Definitions - Basic
-
6 cardsCSE 120 Lecture 07, 09 this is a product term of the function; referred to as P; when P=1 the function is 1
-
6 cardsdigital circuits decimal number system "base 10"
More Digital Logic and Digital Design resources
About digital logic and digital design flashcards
GoConqr OriginalDigital logic and digital design flashcards
The decks on this page offer questions and prompts on topics from bits and logic gates to adders, programmable logic and FPGA architecture. DTEC S1 Flashcards covers terms such as bit, byte and most significant bit, making it a useful starting point if you want to practice the vocabulary.
For truth tables, the CSE 120 lecture deck on inputs and outputs provides fill-in-the-blank prompts. A separate lecture deck asks about the inputs and outputs of half-adders and full-adders. CAD Notes moves into design techniques, synthesis and the design cycle.
Study with a deck
Choose cards on one topic and try to answer each prompt before checking it. Return to the cards you found difficult, then use a different deck to practice a related idea. If you want to see how ideas connect, switch to a mind map on the unit page; use a quiz there when you want a different way to check your understanding.
Open a deck and work through a few cards.
Frequently asked questions
Which flashcard deck is a good place to start?
DTEC S1 Flashcards is a useful starting point for practicing terms such as bit, byte and most significant bit. If you are focusing on gates instead, NAND Equivalence covers Not, And, Or, Nor and Xor. Both give you a specific set of ideas to work through.
What topics do the flashcards cover?
The listed decks cover logic gates, truth tables, adders, sequential logic, programmable logic and FPGA architecture. Some focus on terminology or individual components, while CAD Notes asks about design techniques and synthesis. You can choose a deck that matches the topic you are studying.
Are these flashcards free to use?
Yes. Every resource listed on this page is free to open and study without an account. The decks were made by GoConqr users. A free account also lets you make your own flashcards, quizzes, mind maps and notes, and save your quiz scores.
Who are these flashcards for?
The page includes material for university students and school students, as well as resources teachers can use with a class. The decks range from prompts on bits and logic gates to questions on adders, programmable logic and design. Choose the topic that fits your current work.