Electrical Installation, Wiring Regulations and Safety: quizzes, mind maps and notes

Top Electrical Installation, Wiring Regulations and Safety resources

113 cards
LC Study Cards A general term for the process by which incident flux is converted to another form of energy, usually and u... Jay K
92 questions
Module 1-3 (EWR 19TH EDITION & DELMAR'S 6TH EDITION) The open-circuit voltage between the two terminals of a single-pole switch on a lighting circuit when the s... Lonnie Dobyns
40 questions
Unit 203 Mock Installation Technology Questions Which one of the following directly affects all persons working with electricity in a working environment? Average rating 5.0 out of 5 (3 ratings) · Oliver Balay
40 questions
Unit 203 Revision Question Bank No.2 If a steel wire armoured cable had an overall diameter of 16mm what would be the maximum spacing of clips o... Average rating 5.0 out of 5 (2 ratings) · Oliver Balay
25 questions
Electrical Test 2 1/ Which British Standard details the requirements for the correct installation of electrical components in... Jarmo Tossavainen
40 questions
Unit 203 Revision: Installation Technology Question Bank No.1 A BS3036 protective device is a Average rating 5.0 out of 5 (2 ratings) · Oliver Balay
11 questions
Safe Isolation and Insulation Resistance Recap What is the name of the HSE document that advises on electrical test equipment Giannini Chambers
16 cards
26208-14 Conductor Terminations and Splices - Flash Cards An abbreviation for aluminum and copper, commonly marked on terminals, lugs, and other electrical connector... hcannaday

Quizzes

See all 26 quizzes

Mind maps

Flashcards

See all 14 flashcards

Notes

Unit 38 Written Mock Exam 1) What are all the steps of safe isolation? (5 marks)2) What should be included in a risk assessment? (5 marks)3) Explain the purpose of carrying out the following live tests:i) External fault loop impedance (2 marks... giannini.chambers

About Electrical Installation, Wiring Regulations and Safety

GoConqr Original

What this page covers

The listed resources mix UK and North American material. On the UK side you will find City & Guilds 2365 style revision, such as Unit 203 Mock Installation Technology Questions and Safe Isolation and Insulation Resistance Recap. On the North American side there are NCCER-style quizzes on conductor installations, terminations and splices, plus NEC code flashcards and NEC QUIZ 1—ARTICLES 90 AND 100.

Where to start

Begin with the safety and regulations material. Safe Isolation and Insulation Resistance Recap asks about the Electricity at Work Regulations 1989 and the HSE guidance on test equipment. Then move to Unit 203 Revision: Installation Technology Question Bank No.1, which includes questions on protective devices, volt drop and circuit identification. Unit 203 Revision Question Bank No.2 follows with cable clip spacing and the separation of Band 1 and Band 2 circuits.

If you are working from the NCCER route, try the quizzes on the orientation to the electrical trade first, then the conductor installations quizzes, then terminations and splices.

Using quizzes and maps together

Take a quiz cold and note the questions you miss.
Open a mind map such as Electrical Control Measures, Safe working practices or inspection & testing to see how those topics connect.
Use flashcards, for example the decks on dead testing and live testing, to fix the units and ranges.
Retake the quiz a few days later.

Where it sits

This unit belongs to the Electrical Installation and Applied Systems strand of Electrical and electronic engineering. Teachers can use the mock exam notes and question banks as ready-made practice material for a class.

Choose one quiz today and see which topics need another look. Everything here was made by GoConqr users.

Frequently asked questions

Which quiz should I try first?

Start with Safe Isolation and Insulation Resistance Recap if you want safety and regulations, or Unit 203 Mock Installation Technology Questions if you want a broader installation check. Both are quick ways to see which topics need more revision before you move on.

Are these resources free to use?

Yes. Every resource listed here is free to open, study and take, with no account needed. A free account also saves your quiz scores and lets you make your own quizzes, mind maps, flashcards and notes.

Which exams do the resources mention?

The listed resources mention City & Guilds 2365, City & Guilds more generally, NCCER and the NEC. Some are written as unit revision for UK qualifications, while others follow NCCER module numbers or NEC articles, so check the title to match your course.

What do the mind maps cover?

The mind maps include Electrical Control Measures, Safe working practices, inspection & testing, Fault Diagnosis, Circuit Types and Basic circuit breaker. They suit a quick overview before a quiz or a last look at how topics link together.

Is there anything on testing?

Yes. There are flashcard decks on dead testing sequence, instrumentation, range and units, a deck on live testing instrumentation, and one on dead testing definitions. The insulation resistance recap quiz pairs well with them.

Who made these resources?

They were made by GoConqr users, not by GoConqr. Quality and style vary, so try a quiz or deck, compare it with your own course material, and make your own version if something is missing.

Electrical Installation, Wiring Regulations and Safety