Control Systems
111 resources created by 78 users
This Control Systems page on GoConqr gathers community-made mind maps, flashcards, quizzes and notes, from stability and transient response to root locus, frequency response and multivariable control. It's built for university students working through the topic and teachers after ready-made material. There are over 100 resources here, including more than 60 mind maps, more than 20 flashcard decks and 9 quizzes, made by over 70 contributors. Pick a mind map to get your bearings, then try a quiz to find your gaps.
Top Control Systems resources
-
Mind map Multirate repetitive control for an industrial print-belt system - Geovana S. Abreu
-
200 questionsRed Seal Exam What is the green wire used for on an electrical drill?
-
88 questionsUntitled
-
44 cardsExam two set
-
56 cardsDCEE 24 - Midterms Review The output time response of a system is the sum of two responses. What are these responses?
-
60 cardsUntitled When year is the Industrial revolution?
-
24 questionsIndustrial controls ch 10
-
Mind map MODERN CONTROL DESIGN WITH MATLAB AND SIMULINK
Quizzes
-
200 questionsRed Seal Exam What is the green wire used for on an electrical drill?
-
88 questionsUntitled
-
24 questionsIndustrial controls ch 10
-
22 questionsPaper 2 - Control systems Name the Boolean logic function.
-
3 questionsControl Systems Exit Review Find the Laplace transform of 2/(s + 1) – 4/(s + 3).
-
10 questions9º - Control Systems What is a control system?
-
5 questionsUntitled On and off control is like a furnace it turns on to generate heat when too low but shuts off when meets the...
-
2 questionscontrol system is it necessary that centroid lies in root locus
Mind maps
See all 64 mind maps-
Multirate repetitive control for an industrial print-belt system - Geovana S. Abreu
-
MODERN CONTROL DESIGN WITH MATLAB AND SIMULINK
-
Modern control design
-
Modern control design with matlab and simulink
-
Modern Control Design With MATLAB and SIMULINK (Introduction )chapter 1
-
Different Types of Stability
-
History and terminology of control systems
-
STABILITY
Flashcards
See all 23 flashcards-
44 cardsExam two set
-
56 cardsDCEE 24 - Midterms Review The output time response of a system is the sum of two responses. What are these responses?
-
60 cardsUntitled When year is the Industrial revolution?
-
17 cardsCh 8: Root Locus Techniques What does a root locus represent?
-
16 cardsWeek 5 -Fuzzy logic Describe fuzzy systems.
-
18 cardsControl System Design and Analysis - Exam prep what type of system is this? + list the components of the following system.
-
14 cardsCh 5: Reduction of Multiple Subsystems What are the four components of a block diagram for a linear, time-invariant system?
-
13 cardsCh 10: Frequency Response Techniques
Flowcharts
Notes
-
Control Systems Impulse Response Function is also known as the Weighting Function. A system is Linear if the principle of Superposition applies, which states that the response produced by the simultaneous application of two different...
-
Introduction - created from Mind Map Mathematical Foundation Mathematical Modeling of Physical Systems Transfer Functions
-
Thesis - created from Mind Map_2 Presentation Context Contributions Objectives Syllabus Introduction Preliminary definitions State of the Art D-LPV systems Observers for D-LPV Summary Definitions Biographical review Modelling Properties Sector no lin...
-
Thesis - created from Mind Map Presentation Context Contributions Objectives Syllabus Introduction Preliminary definitions State of the Art D-LPV systems Observers for D-LPV Summary Definitions Biographical review Modelling Properties Sector no lin...
-
Thesis - created from Mind Map_1 Presentation Context Contributions Objectives Syllabus Introduction Preliminary definitions State of the Art D-LPV systems Observers for D-LPV Summary Definitions Biographical review Modelling Properties Sector no lin...
-
Types of stability - creado desde un Mapa Mental Definition Asymptotic stability Stability in impulse response
-
Control System Engineering Control System Engieering: A control system consists of subsystems and processes (or plants) assembled for the purpose of obtaining a desired output with desired performance, given a specified input. We b...
-
CONTROL & ROBOTICS - creado desde un Mapa Mental Automatic control Computer controlled Sensors
Slides
Topics in Control Systems
More Electrical and electronic engineering topics
About Control Systems
GoConqr OriginalWhat the page covers
The resources here follow the usual path of a control course. Several mind maps deal with stability, including Routh's stability criterion and different types of stability. Others cover transient response, controllability, observability, feedback control and the P, I, D family of controllers.
Where to start
Begin with the overview material. The mind maps History and terminology of control systems and Feedback Control give you the vocabulary. The notes Introduction - created from Mind Map list mathematical modelling, transfer functions, state space, block diagrams and signal-flow graphs, so they work as a map of the early topics.
- Read an overview mind map or the introductory notes.
- Work through the flashcard decks in chapter order.
- Move on to the advanced maps and notes.
Flashcards by chapter
The chapter decks ask direct questions. Ch 5: Reduction of Multiple Subsystems asks about block diagram components and ways of interconnecting subsystems. Ch 6: Stability asks about closed-loop poles and marginal stability. Ch 7: Steady-State Error looks at how gain affects error. Ch 8: Root Locus Techniques asks what a root locus represents. There are also decks on frequency response in Ch 9 and Ch 10.
Going further
Some maps reach into design and applications. Several cover Modern Control Design With MATLAB and SIMULINK. Others look at multivariable control, including predictive control, decoupling and step and relay tests, and a mind map on multirate repetitive control for an industrial print-belt system. A few thesis notes deal with D-LPV systems and observers. Most of the page is aimed at university level, so teachers may find these useful for extension work.
Using quizzes with maps
Study a map first, then take a quiz such as Paper 2 - Control systems or Industrial controls ch 10 without looking back. Wherever you slip, return to the matching map or deck. Pick a topic, try a quiz, and then make your own maps and flashcards.
Frequently asked questions
Where should I start on this page?
Start with an overview mind map such as History and terminology of control systems or Feedback Control. Then read the notes Introduction - created from Mind Map, which list modelling, transfer functions, state space and block diagrams. After that, move to the chapter flashcard decks in order.
What do the mind maps cover?
There are more than 60 mind maps. They cover stability, Routh's criterion, transient response, controllability, observability, feedback control and PID controllers. Others look at MATLAB and SIMULINK design, multivariable control and repetitive control for an industrial print-belt system.
Are the resources free to use?
Yes. Every resource listed here is free to open, study and take, with no account needed. The resources were made by GoConqr users rather than by GoConqr itself, so it is worth comparing a few on the same topic.
Which levels is this page suited to?
Most of the material is at university level, so it suits university students most of all. Some resources are pitched lower, and teachers can use the maps, notes and decks as ready-made material for classes.
Are there flashcards for particular chapters?
Yes. There are decks for Ch 5 on reducing multiple subsystems, Ch 6 on stability, Ch 7 on steady-state error, Ch 8 on root locus techniques, Ch 9 on system analysis in the frequency domain and Ch 10 on frequency response techniques.
What if I can't find a topic I need?
Try a nearby map or deck first, since topics such as stability and MATLAB design appear in several versions. If a gap remains, you can build your own mind map, flashcards or notes with a free account, which also saves your quiz scores.